Differences

This shows you the differences between two versions of the page.

--- resources:tools-software:uc-drivers:renesas:adxl345 [28 Sep 2012 13:55] – Removed the Microchip sections. Dragos Bogdan
+++ resources:tools-software:uc-drivers:renesas:adxl345 [24 Jan 2021 17:05] – Fix bad links Dragos Bogdan
@@ Line 1: / Line 1: @@
+====== ADXL345 - No-OS Driver for Renesas Microcontroller Platforms ======
 {{page>:resources:tools-software:uc-drivers:adxl345}}
 **HW Platform(s):**
-  * [[http://am.renesas.com/products/tools/introductory_evaluation_tools/renesas_demo_kits/yrdkrl78g13/index.jsp|Renesas Demo Kit for RL78G13 (Renesas)]]
+  * [[https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rl78-low-power-8-16-bit-mcus/yrdkrl78g13-yrdkrl78g13-demonstration-kit-rl78g13|Renesas Demo Kit for RL78G13 (Renesas)]]
-  * [[http://am.renesas.com/products/tools/introductory_evaluation_tools/renesas_demo_kits/yrdkrx62n/index.jsp|Renesas Demo Kit for RX62N (Renesas)]]
+  * [[https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rx-32-bit-performance-efficiency-mcus/yrdkrx62n-yrdkrx62n-demonstration-kit-rx62n|Renesas Demo Kit for RX62N (Renesas)]]
 ===== Downloads =====
-  * {{:resources:tools-software:uc-drivers:adxl345_generic.zip|ADXL345 Generic Driver}}
+<WRAP round download 80%>
   * {{:resources:tools-software:uc-drivers:renesas:adxl345_rl78g13.zip|ADXL345 RL78G13 Driver}}
   * {{:resources:tools-software:uc-drivers:renesas:adxl345_rx62n.zip|ADXL345 RX62N Driver}}
+  * **ADXL345 Driver:           ** https://github.com/analogdevicesinc/no-OS/tree/master/drivers/accel/adxl345
+  * **PmodACL Demo for RL78G14: ** https://github.com/analogdevicesinc/no-OS/tree/master/Renesas/RL78G14/PmodACL
+  * **RL78G14 Common Drivers:   ** https://github.com/analogdevicesinc/no-OS/tree/master/Renesas/RL78G14/Common
+</WRAP>
 ====== Renesas RL78G13 Quick Start Guide ======
@@ Line 14: / Line 20: @@
 ==== Required Hardware ====
-  * [[http://am.renesas.com/products/tools/introductory_evaluation_tools/renesas_demo_kits/yrdkrl78g13/index.jsp|Renesas Demo Kit for RL78G13 (Renesas)]]
+  * [[https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rl78-low-power-8-16-bit-mcus/yrdkrl78g13-yrdkrl78g13-demonstration-kit-rl78g13|Renesas Demo Kit for RL78G13 (Renesas)]]
   * [[http://www.digilentinc.com/Products/Detail.cfm?Prod=PMOD-ACL|PmodACL]] (optional, because an ADXL345 part is installed on Renesas Demonstration Kit (RDK) for RL78G13)
 ==== Required Software ====
   * [[http://www.iar.com/en/Products/IAR-Embedded-Workbench/Renesas-RL78/|IAR Embedded Workbench for Renesas RL78 Kickstart]]
-  * [[http://am.renesas.com/|Applilet3 for RL78G13]]
 ==== Hardware Setup ====
@@ Line 32: / Line 37: @@
 {{ :resources:tools-software:uc-drivers:renesas:pmod_acl_rl78g13.jpg? |}}
-==== Software Setup ====
+==== Reference Project Overview ====
-With the //**Applilet3 for RL78G13**// tool the following peripherals have to be configured:
+In this example, the output data of each axis is read and displayed on the Renesas Demonstration Kit for RL78G13 board’s LCD. Were also activated “Single Tap”, “Double Tap” and “Free-Fall” interrupts. When one of them occurs, on the LCD screen appears a corresponding message.
-=== CSI10 (Clocked Serial Interface 10) – For the ST7579 LCD and the ADXL345 part(if the SPI protocol is chosen) ===
+{{ :resources:tools-software:uc-drivers:renesas:adxl345_rl78g13_screen.jpg? |}}
-Choose to generate the Transmit/receive function for the CSI10 and configure the interface with the following settings:
-  * Transfer mode setting: //**Single transfer mode**//
-  * Data length setting : //**8 bits**//
-  * Transfer direction setting: //**MSB**//
-  * Specification of data timing: //**Type 1**//
-  * Transfer rate setting – Clock mode: //**Internal clock (master)**//
-  * Transfer rate setting – Baudrate: //**1000000**// (bps)
-  * Interrupt setting – Transfer interrupt priority (INTCSI10): //**Low**//
-  * Uncheck the callback functions.
-=== IICA0 (Inter Integrated Circuit Bus) - For the ADXL345 part(if the I2C protocol is chosen) ===
+==== Software Project Setup ====
-Choose the //**Single master**// transfer mode and configure the interface with the following settings:
+{{page>rl78g13_software_tutorial_without_applilet3}}
-  * Clock mode setting: //**fCLK/2**//
-  * Local address setting – Address: //**16**//
-  * Operation mode setting : //**Standard**//
-  * Operation mode setting – Transfer clock (fSCL): //**100000**// (bps)
-  * Interrupt setting – Communication end interrupt priority (INTIICA0): //**Low**//
-  * Callback function setting: Check //**Master transmission end**// and //**Master reception end**// callback functions
-  * Callback function enhanced feature setting: Check the //**Callback function enhanced feature setting**//.
-=== TM00 (Timer 00) – For the DelayMs() function ===
+====== Renesas RL78G14 Quick Start Guide ======
-Configure TM00 as an interval timer:
+This section contains a description of the steps required to run the ADXL345 demonstration project on a Renesas RL78G14 platform using the PmodACL.
-  * Interval timer setting - Interval value(16 bits): //**1**// ms
-  * Interval timer setting - Uncheck //Generates INTM00 when counting is started//
-  * Interrupt setting - Uncheck // End of timer channel 0 count, generate an interrupt (INTM00)//
-=== Watchdog Timer ===
+==== Required Hardware ====
-Disable the watchdog timer:
-  * Choose for the Watchdog timer operation setting: //**Unused**// option.
+  * [[http://am.renesas.com/products/tools/introductory_evaluation_tools/renesas_demo_kits/yrdkrl78g14/index.jsp|Renesas Demo Kit for RL78G14 (Renesas)]]
+  * [[http://www.digilentinc.com/Products/Detail.cfm?Prod=PMOD-ACL|PmodACL]] (optional, because an ADXL345 part is installed on Renesas Demonstration Kit (RDK) for RL78G14)
+==== Required Software ====
+  * [[http://www.iar.com/en/Products/IAR-Embedded-Workbench/Renesas-RL78/|IAR Embedded Workbench for Renesas RL78 Kickstart]]
+  * The ADXL345 demonstration project for the Renesas RL78G14 platform.
+<WRAP round info 80%>
+The ADXL345 demonstration project for the Renesas RL78G14 platform consists of three parts: the **ADXL345 Driver**,  the **PmodACL Demo for RL78G14** and the **RL78G14 Common Drivers**.
+All three parts have to be downloaded.
+</WRAP>
+==== Hardware Setup ====
+There are two options:
+  * The ADXL345 part installed on the Renesas Demonstration Kit (RDK) for RL78G14 can be used. In this case, the I2C protocol has to be chosen with 'ADXL345_Init()' function.
+{{ :resources:tools-software:uc-drivers:renesas:adxl345_rl78g14.jpg? |}}
+  * A PmodACL can be connected to the PMOD1 connector. In this case, the SPI protocol has to be chosen with 'ADXL345_Init()' function.
+{{ :resources:tools-software:uc-drivers:renesas:pmod_acl_rl78g14.jpg? |}}
 ==== Reference Project Overview ====
-In this example, the output data of each axis is read and displayed on the Renesas Demonstration Kit for RL78G13 board’s LCD. Were also activated “Single Tap”, “Double Tap” and “Free-Fall” interrupts. When one of them occurs, on the LCD screen appears a corresponding message.
+The reference project:
+  * reads and displays the data for each axis on LCD;
+  * it displays also on LCD if the interrupts “Single Tap”, “Double Tap” or “Free-Fall” were activated.
-{{ :resources:tools-software:uc-drivers:renesas:adxl345_rl78g13_screen.jpg? |}}
+{{ :resources:tools-software:uc-drivers:renesas:adxl345_rl78g14_screen.jpg? |}}
+==== Software Project Tutorial ====
+{{page>rl78g14_software_tutorial}}
-==== Software Project Setup ====
-{{page>rl78g13_software_tutorial}}
 ====== Renesas RX62N Quick Start Guide ======
@@ Line 78: / Line 88: @@
 ==== Required Hardware ====
-  * [[http://am.renesas.com/products/tools/introductory_evaluation_tools/renesas_demo_kits/yrdkrx62n/index.jsp|Renesas Demo Kit for RX62N (Renesas)]]
+  * [[https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rx-32-bit-performance-efficiency-mcus/yrdkrx62n-yrdkrx62n-demonstration-kit-rx62n|Renesas Demo Kit for RX62N (Renesas)]]
   * [[http://www.digilentinc.com/Products/Detail.cfm?Prod=PMOD-ACL|PmodACL]] (optional, because an ADXL345 part is installed on Renesas Demonstration Kit (RDK) for RX62N)
 ==== Required Software ====
-  * [[http://www.renesas.com/products/tools/ide/ide_hew/index.jsp|High-performance Embedded Workshop for RX62N family]]
+  * [[https://www.renesas.com/us/en/software-tool/high-performance-embedded-workshop|High-performance Embedded Workshop for RX62N family]]
   * [[http://am.renesas.com/products/tools/middleware_and_drivers/c_driver_gen/driver_gen_rpdl/index.jsp|Renesas Peripheral Driver Library for RX62N family]]
@@ Line 111: / Line 121: @@
 {{page>rx62n_software_design}}
+====== More information ======
+{{page>:resources:tools-software:uc-drivers:more-information}}

Wiki

Analog Devices Wiki

Differences

Analog Devices Wiki

Differences

Page Tools