This version (01 Apr 2024 13:59) was approved by John Joseph.The Previously approved version (17 Sep 2022 06:55) is available.
Table of Contents
Click here to return to the Sources page
DC Input No Mips
Description
The DC Input No MIPs Block is a parameter value write utility which can write directly to any parameter.
The block's controls allow the value and the format to be set. There are 32/28 available bits which can be used to represent decimal values depends on the SigmaDSP.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/ADSP-SC5xx | ADAU145x/146x |
|---|---|---|---|
| DC Input No MIPs | NA | NA | Sample |
Pins
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| DCValue | 0 | 0 to 2147483647 | This control gives the DC, direct current, signal(a constant numeric value) |
| IntegerBits | 5/8 | 0 to 32 (Only for SigmaDSP) | This control decides the range of DC control |
| DecimalBits | 23/24 | 0 to 32(Only for SigmaDSP) | This control decides the range of DC control |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx | ADAU145x/146x |
|---|---|---|---|
| DCValue | DC, direct current, signal(a constant numeric value) | Float | Format specified in UI |
resources/tools-software/sigmastudiov2/modules/sources/dcinputnomips.txt · Last modified: 01 Apr 2024 13:59 by John Joseph