This version is outdated by a newer approved version.
This version (10 Feb 2021 12:41) was approved by Sanjeeva Reddy.
This version (10 Feb 2021 12:41) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Sources page
DC Input Entry
Description
The DC Input Block allows you to generate a DC, direct current, signal(a constant numerical value). This Block can be used to generate control signals for Multiplexers and Lookup Tables.
The block's controls allow the DC value and the format to be set. There are 32/28 available bits which can be used to represent decimal values depends on the SigmaDSP.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| DC Input Entry | Yes | Yes | Yes | Yes |
Pins
Output
| Name | Type | Description |
|---|---|---|
| Output | Control | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| DCValue | 0 | 0 to 2147483647 | This control gives the DC, direct current, signal(a constant numeric value) |
| IntegerBits | 5/8 | 0 to 32 (Only for SigmaDSP) | This control decides the range of DC control |
| DecimalBits | 23/24 | 0 to 32(Only for SigmaDSP) | This control decides the range of DC control |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx |
|---|---|---|
| DCValue | DC, direct current, signal(a constant numeric value) | Float |
resources/tools-software/sigmastudiov2/modules/sources/dcinputentry.1610687264.txt.gz · Last modified: 15 Jan 2021 06:07 by Nikhin Shetty