This version (06 May 2021 07:12) is a draft.
Approvals: 0/1The Previously approved version (05 Feb 2020 08:00) is available.
Approvals: 0/1The Previously approved version (05 Feb 2020 08:00) is available.
Table of Contents
Click here to return to the Mixers and Splitters page
Signal Splitter
Description
The Splitter block splits an input signal to two are more outputs.
Complex Splitter module split the complex input to real part and imaginary part.
Variants
- Splitter
- Block Splitter
- Splitter (Frequency Domain)
- Complex Splitter
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| ————————————————-- | ——————-- | ——————————-- | —————————- |
| Splitter | B/S | B/S | NA |
| Block Splitter | NA | NA | B |
| Splitter (Frequency Domain) | NA | NA | B |
| Complex Splitter | NA | NA | B |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ———————- | ———————————————————————————————— | ————————————- |
| Input0 | Audio(Complex Pin for Complex Splitter & Splitter Frequency domain) | Input channel 0 |
Output
| Name | Type | Description |
|---|---|---|
| ———————- | ———————————————————————————————- | ————————————- |
| OutputX | Control(Complex Pin for Splitter Frequency domain) | Output channel X |
Note:
- X - Channel Index
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| ————————————— | ————————- | ——————- | —————————————————————- |
| NumChannels | 2 | 20 | Number of output channels. Change in this value requires re-compilation |
resources/tools-software/sigmastudiov2/modules/mixersandsplitters/splitter.txt · Last modified: 06 May 2021 07:12 by Nikhin Shetty