Wiki

The most recent version of this page is a draft.DiffThis version (05 May 2021 07:43) is a draft.
Approvals: 0/1
The Previously approved version (15 Jan 2021 04:41) is available.Diff

This is an old revision of the document!


Click here to return to the Mixers and Splitters page

Multiple Control Splitter


Description

The Multiple Control Splitter allows an input signal to be split into two or more outputs with independent control of each output's gain.

Usage

There is a control knob for setting the gain or each output. To set the gain, click the knob with the left mouse button and drag while holding down the button. Each knob's range, value, and step size can be customized in the control pop-up window. To change the knob settings, right-click on the knob control

Varaints

  1. Multiple Control Splitter (No Slew)
  2. Multiple Control Splitter (SW Slew)
  3. Multiple Control Splitter (HW Slew)


Targets Supported

NameADSP-214xx(Sample)ADSP-214xx(Block)ADSP-215xx/ADSP-SC5xx(Sample)ADSP-215xx/ADSP-SC5xx(Block)
Multiple Control Splitter (No Slew) Yes YesYes Yes
Multiple Control Splitter (SW Slew) Yes YesYes Yes


Pins

Input

NameTypeDescription
InputAudioInput channel

Output

NameTypeDescription
Output0ControlOutput channel 0
Output1ControlOutput channel 0


Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
Gain_Channel00 dB-200 to 200 dBGain factor
NumChannels220Number of output channels. Change in this value requires re-compilation


DSP Parameters

Parameter NameDescriptionADSP-214xx/SC5xx/215xx
Gain_Channel0scaling of the inputsFloat


resources/tools-software/sigmastudiov2/modules/mixersandsplitters/multiplecontrolsplitter.1620193386.txt.gz · Last modified: 05 May 2021 07:43 by Nikhin Shetty