This version is outdated by a newer approved version.
This version (07 May 2021 13:21) was approved by Prasad Kamath.The Previously approved version (07 May 2021 13:19) is available.
This version (07 May 2021 13:21) was approved by Prasad Kamath.The Previously approved version (07 May 2021 13:19) is available.This is an old revision of the document!
Table of Contents
Click here to return to the IO page
Master Control Port Read IO
Description
The Interface Read block takes value from one of eight interface registers and makes it available in the schematic design. The yellow pin can connect to GPIO Conditioning block's yellow input pins. It is especially useful for parts that self-boot and use external interface registers.
Usage
Select a particular interface from the drop-down.
- Every input must be connected to an output, else there will be errors on compilation.
- Observe that as you drag more output blocks to your schematic, your number of interfaces available decreases.
Note: This block is only available for DSPs with GPIOs or auxiliary ADC.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/ADSP-SC5xx | ADAU145x/1456x |
|---|---|---|---|
| —————————————- | —————————————— | ————————————————-- | ——————————————- |
| Interface Read | Not supported | Not supported | Sample |
Pins
Output
| Name | Type | Description |
|---|---|---|
| ————— | ——————- | ———————-- |
| InterfaceRead | Logic | Interface read output channel |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| —————————————- | ———————- | ——————————— | —————————————- |
| SelectedIFIPChannel | IRCh0 | IRCh0 to IRCh19 | Selects the Interface Read channel |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx | ADAU145x/ADAU146x |
|---|---|---|---|
| —————————-- | ———————————— | —————————————————-- | ———————————-- |
Not applicable
DSP Parameter Computation
Not applicable
resources/tools-software/sigmastudiov2/modules/inputoutput/interfacereadio.1620386475.txt.gz · Last modified: 07 May 2021 13:21 by Prasad Kamath