Wiki

This version is outdated by a newer approved version.DiffThis version (10 Feb 2021 12:57) was approved by Sanjeeva Reddy.

This is an old revision of the document!


Click here to return to the Gain page

Single Slew External Volume


Description

The Single Slew Ext Vol block controls level of the signal through external pin. Such capability would be appropriate for an application like external control communication to ab 8-10 bit ADC.

Usage

This block has text filed to specify the slew rate for smooth transition from one level of the signal to another level.slew rate is configurable from 1 to 23. Signal transition from one level to another level is faster when slew rate value is low and Signal transition from one level to another level is slower when slew rate value is high.

Targets Supported

NameADSP-214xx(Sample)ADSP-214xx(Block)ADSP-215xx/ADSP-SC5xx(Sample)ADSP-215xx/ADSP-SC5xx(Block)
Single Slew Ext Vol Yes YesYes Yes


Pins

Input

NameTypeDescription
ControlInputControlControls the signal level of output
Input0AudioInput channel 0

Output

NameTypeDescription
Output0ControlOutput channel 0


Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
SlewRate(StepSize)121 to 23Controls the transtion time of signal from one level to another level
SlewTypeRCRC,DB(only in Block)Allows to select the slew type for algorithm. Change in slewType requires re-compilation
NumChannels120Num of input and output channels.Change in this value requires re-compilation


DSP Parameters

Parameter NameDescriptionADSP-214xx/SC5xx/215xx
SlewRateControls the transtion time of signal from one level to another levelFloat


DSP Parameter Computation

SlewRate = 2^(-1*StepSize)

resources/tools-software/sigmastudiov2/modules/gain/singleslewextvol.1583129859.txt.gz · Last modified: 02 Mar 2020 07:17 by Sreesha Y M