This shows you the differences between two versions of the page.
Previous revisionNext revision | |||
— | resources:tools-software:sigmastudiov2:modules:filters:indexselectablemultiplebad:index_selectable_multiple_band [12 May 2021 19:42] – [Input] Sreesha Y M | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | [[resources/ | ||
+ | ======Index Selectable Multiple Band ====== | ||
+ | \\ | ||
+ | {{: | ||
+ | \\ | ||
+ | {{: | ||
+ | \\ | ||
+ | {{: | ||
+ | ===== Description ===== | ||
+ | The Index Selectable Multiple Band block provides a wide variety of 2nd-order filter algorithms. | ||
+ | |||
+ | The available filter types are: | ||
+ | - Low shelf filter | ||
+ | - High shelf filter | ||
+ | - Parametric filter | ||
+ | - Peaking filter | ||
+ | - First order low shelf filter | ||
+ | - First order high shelf filter | ||
+ | - Notch filter | ||
+ | - Band pass filter | ||
+ | - Band stop filter | ||
+ | - All pass filter | ||
+ | - High pass filter | ||
+ | - Low pass filter | ||
+ | \\ | ||
+ | |||
+ | ===== Variants ===== | ||
+ | - Index Selectable Multiple Band (1 Ch) | ||
+ | - Index Selectable Multiple Band (2 Ch) | ||
+ | \\ | ||
+ | ===== Targets Supported ===== | ||
+ | ^ Name ^ ADSP-214xx ^ ADSP-215xx/ | ||
+ | | --------------------------------------------------------- | -------------------- | -------------------------------- | ---------------------------- | | ||
+ | |Index Selectable Multiple Band (1 Ch)| B/S | B/S | S | | ||
+ | |Index Selectable Multiple Band (2 Ch)| B/S | B/S | S | | ||
+ | \\ | ||
+ | ===== Pins ===== | ||
+ | ==== Input ==== | ||
+ | ^Name^Type^Description^ | ||
+ | | ------------------------------ | ------------------------------ | ------------------------------------------------ | | ||
+ | |IndexSelectInput0|Control|Index of the selected frequency response curve| | ||
+ | |Input1|Audio|Input to the filter| | ||
+ | ==== Output ==== | ||
+ | ^Name^Type^Description^ | ||
+ | |Output1|Audio|The filtered output| | ||
+ | \\ | ||
+ | ===== Configurable Parameters ===== | ||
+ | ^GUI Parameter Name^Default Value^Range^Function Description^ | ||
+ | |FilterCount|1|0 to 99|Selects a filter response curve by filter number selected| | ||
+ | |Boost|0 dB| -20 to +20 dB|Set the boost value for a particular filter curve| | ||
+ | |Frequency|100 Hz|0 to 96 KHz|Cut-off frequency| | ||
+ | |Gain|0 dB|-15 to +15 dB|Filter Gain| | ||
+ | |Q|1.41|0.1 to 15|Q factor of the filter| | ||
+ | |FilterType|Parametric filter|Available filter Types|Controls the type of the filter| | ||
+ | |EnabledOrBypassed|True|True/ | ||
+ | |Phase|False|True/ | ||
+ | |||
+ | \\ | ||
+ | ===== DSP Parameters ===== | ||
+ | ^Parameter Name^Description^ADSP-214xx/ | ||
+ | |Stage< | ||
+ | |Stage< | ||
+ | |Stage< | ||
+ | |Stage< | ||
+ | |Stage< | ||
+ | \\ Here, | ||
+ | * <fc #ff0000> Red</ | ||
+ | \\ | ||