This version is outdated by a newer approved version.
This version (11 May 2021 10:19) was approved by Krithika Manchale.
This version (11 May 2021 10:19) was approved by Krithika Manchale.This is an old revision of the document!
Table of Contents
Click here to return to the Filters page
General Eq Single Blend
Description
The General (2nd-Order) block gives access to a wide variety of 2nd-order (biquad)filter algorithms along with equalization. Blend factor and slew rate modifications are common for all the stages.
The available filter types are:
- Unordered List ItemOrdered List ItemParametric
- Shelving
- General High-Pass
- General Low-Pass
- General Band-Pass
- General Band-Stop
- Butterworth Low-Pass / High-Pass
- Bessel Low-Pass / High-Pass
- Tone Control
- IIR Coefficient (direct coefficient entry)
- 1st-Order Low-Pass / High-Pass
- All-pass
- Peaking
- Notch
- Chebyshev Low-Pass / High-Pass
Usage
To open the filter control window, click on the icon button. Select the desired filter type from the drop-down combo-box list. The filter controls and the icon button image will change to reflect the selected filter type.
Variants
General Equalizer module with Single Ext blend factor(General Eq Ext Blend).
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| GeneralEqSingleBlend | Yes | Yes | Yes | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Input0 | Audio | Input Channel 0 |
| Blend0 | Control | External Blend pin for SingleEqExtBlend variant |
Output
| Name | Type | Description |
|---|---|---|
| Output0 | Audio | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| Frequency | 1000 | 0 to 96000Hz | Cut-off frequency |
| Gain | 0 dB | -10 to +10 dB | Filter Gain |
| Q | 1.41 | 1 to 15 | Q factor of the filter |
| NumChannels | 1 | 1 to 20 | Increases or decreases the number of input and output channels. Changing this requires re-compilation |
| NumStages | 1 | 1 to 20 | Increases or decreases the number of filter stages. Changing this requires re-compilation |
| Blend | 0 | 0 to 1 | Blend factor for the equalizer module |
| SlewRate | 0.01 | 1 to 1 | Defines the rate at which input takes the new value |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx |
|---|---|---|
| Stage0_B0 | B0 Filter Coefficient | Float |
| Stage0_B1 | B1 Filter Coefficient | Float |
| Stage0_B2 | B2 Filter Coefficient | Float |
| Stage0_A1 | A1 Filter Coefficient | Float |
| Stage0_A2 | A2 Filter Coefficient | Float |
Here,
- Red - Stage Number (Changes for each stage coefficients)
resources/tools-software/sigmastudiov2/modules/filters/generaleqsingleblend.1611030851.txt.gz · Last modified: 19 Jan 2021 05:34 by Krithika Manchale