This version is outdated by a newer approved version.
This version (10 Feb 2021 13:09) was approved by Sanjeeva Reddy.
This version (10 Feb 2021 13:09) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Basic page
Min Value Hold
Description
The MinValueHold block monitors one (or more) input(s) and routes the minimum value of the input to the output. This block held's the min value while the control input is 1 and reset the min value while the control input is 0.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| MinValueHold | Yes | Yes | Yes | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Reset | Control | Resets the minimum value |
| Input0 | Audio | Input channel 0 |
Output
| Name | Type | Description |
|---|---|---|
| Output0 | Audio | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| NumChannels | 1 | 20 | Number of input and output channels. Change in this value requires re-compilation |
DSP Parameters
No DSP parameters
resources/tools-software/sigmastudiov2/modules/basic/minvaluehold.1580808666.txt.gz · Last modified: 04 Feb 2020 10:31 by Sanjeeva Reddy