This version is outdated by a newer approved version.
This version (12 Nov 2019 10:03) is a draft.
Approvals: 0/1
This version (12 Nov 2019 10:03) is a draft.Approvals: 0/1
This is an old revision of the document!
Table of Contents
Click here to return to the Basic page
Max Value Hold
Description
The MaxValueHold block monitors one (or more) input(s) and routes the max value of the input to the output. This block held's the max value while the control input is 1 and reset the max value while the control input is 0.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| MaxValueHold | Yes | Yes | Yes | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Reset | Control | Resets the maximum value |
| Input0 | Audio | Input channel 0 |
Output
| Name | Type | Description |
|---|---|---|
| Output0 | Audio | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| NumChannels | 1 | 20 | Number of input and output channels. Change in this value requires re-compilation |
DSP Parameters
No DSP parameters
resources/tools-software/sigmastudiov2/modules/basic/maxvaluehold.1573549388.txt.gz · Last modified: 12 Nov 2019 10:03 by Sanjeeva Reddy