The most recent version of this page is a draft.
This version (10 Feb 2021 13:08) was approved by Sanjeeva Reddy.
This version (10 Feb 2021 13:08) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Basic page
Data Controlled Clip
Description
The Data Controlled Clip is a hard-clipper that clips the input data signal according to threshold values set by data control input pins.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| Data Controlled Clip | Yes | Yes | Yes | Yes |
Pins
Input
| High_Threshold | Control | Threshold clip level for the top of the waveform |
| Low_Threshold | Control | Threshold clip level for the bottom of the waveform |
| Input0 | Audio | Input Channel 0 |
Output
| Output0 | Audio | Hard clipped output audio |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| NumChannels | 1 | 20 | Number of input and output channels. Change in channels requires re-compilation |
DSP Parameters
No DSP Parameters
/srv/wiki.analog.com/data/pages/resources/tools-software/sigmastudiov2/modules/basic/datacontrolledclip.txt · Last modified: 29 Jul 2022 15:17 by Ashwin PS