The most recent version of this page is a draft.
This version is outdated by a newer approved version.This version (10 Feb 2021 13:14) was approved by Sanjeeva Reddy.
This version is outdated by a newer approved version.This version (10 Feb 2021 13:14) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Arithmetic and Logic page
Square Summation
Description
The Square Summation block adds the square of the input to the sum of previous square of inputs and outputs the result of sum.
Usage
The Reset pin is available to reset the summation result. Other than the zero to reset pin, resets the summation value.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| Square Summation | No | Yes | No | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Reset | Control | Resets the summation result |
| Input0 | Audio | Input channel 10 |
Output
| Name | Type | Description |
|---|---|---|
| Output0 | Audio | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| NumChannels | 2 | 20 | Number of input and output channels. Change in this value requires re-compilation |
DSP Parameters
No DSP parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/squaresummation.1580798204.txt.gz · Last modified: 04 Feb 2020 07:36 by Sanjeeva Reddy