The most recent version of this page is a draft.
This version is outdated by a newer approved version.This version (10 Feb 2021 13:14) was approved by Sanjeeva Reddy.
This version is outdated by a newer approved version.This version (10 Feb 2021 13:14) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Arithmetic and Logic page
Signal Subtract
Description
The Signal Subtract block subtracts the input signals(all input signals are subtracted to the first signal) and outputs the difference result.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| Signal Subtract | Yes | Yes | Yes | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Input0 | Audio | Input channel 0 |
| Input1 | Audio | Input channel 1 |
Output
| Name | Type | Description |
|---|---|---|
| Difference | Audio | Result of the difference of first channel and sum of other channels |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| NumChannels | 2 | 20 | Number of input channels. Change in this value requires re-compilation |
DSP Parameters
No DSP parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/signalsubtract.1580798100.txt.gz · Last modified: 04 Feb 2020 07:35 by Sanjeeva Reddy