This version (18 May 2021 08:49) was approved by John Joseph.The Previously approved version (08 Feb 2021 03:45) is available.
Table of Contents
Click here to return to the Arithmetic and Logic page
Power 2
Description
The Power2 block computes the power of the input to the base 2.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| 2 Power x | B | B | S |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ———————————— | —————————— | —————————————- |
| Input | Audio | Input channel |
Output
| Name | Type | Description |
|---|---|---|
| ———————————— | —————————— | —————————————- |
| Power2 | Control | Power Output |
| OverFlowUnderFlowFlag | Control | Flag |
Configurable Parameters
No configurable parameters
DSP Parameters
NO DSP Parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/power2.txt · Last modified: 07 May 2021 07:20 by Krithika Manchale