This version (18 May 2021 08:57) was approved by Nikhin Shetty.
Table of Contents
Click here to return to the Arithmetic and Logic page
Logic Gate
Description
The Logic block applies one of five selectable logic operations to the two input signals and outputs the result on the output pin.
Usage
Click on the icon button, each click will toggle the active operator which is shown in the icon image and label.
- AND
- NAND
- OR
- NOR
- XOR
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| LogicGate | B/S | B/S | S |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ————————————— | —————————- | ————————————— |
| Input0 | Audio | Input channel 0 (Input Signal A) |
| Input1 | Audio | Input channel 1 (Input Signal B) |
Output
| Name | Type | Description |
|---|---|---|
| ————————————— | —————————- | ————————————— |
| Output | Audio | Output channel |
Configurable Parameters
No configurable Parameters
DSP Parameters
NO DSP parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/logicgate.txt · Last modified: 06 May 2021 14:36 by Krithika Manchale