This version (10 May 2021 15:40) was approved by Krithika Manchale.
Table of Contents
Click here to return to the Arithmetic and Logic page
Bit Shift
The Shift block allows you to perform an arithmetic shift operation on the input data.
Click the image to switch between left shift or right shift. The shift value represents the number of bits to shift the incoming value.
If a shift results in an overflow the data will be saturated to the minimum negative or maximum positive value [-128.0, +127.9999].
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| Bit Shift | NA | NA | S |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ———————————— | —————————— | —————————————- |
| Input0 | Audio | Input Signal |
Output
| Name | Type | Description |
|---|---|---|
| ———————————— | —————————— | —————————————- |
| Output0 | Audio | Bit shifted output |
Configurable Parameters
No Configurable parameters
DSP Parameters
NO DSP parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/bitshift.txt · Last modified: 07 May 2021 07:10 by Krithika Manchale