This version (18 May 2021 08:51) was approved by John Joseph.The Previously approved version (14 Jan 2021 11:22) is available.
Table of Contents
Click here to return to the Arithmetic and Logic page
AB In-Out Condition
Description
The ABIn-OutCondition block lets you compare the sample-by-sample level of two incoming signals (A & B) and output the sample of the signal meeting the condition.
This algorithm works only for DSP's with conditional instruction.
Usage
Click the icon in the block to select the condition you want to check:
- greater than
- less than
- greater than or equal to
- less than or equal to
When the condition is true, output sample is A; otherwise, it's B.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| AB In-Out | B/S | B/S | S |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ————————————— | —————————- | ————————————————- |
| Input0 | Audio | Input channel 0 (Input Signal A) |
| Input1 | Audio | Input channel 1 (Input Signal B) |
Output
| Name | Type | Description |
|---|---|---|
| ————————————— | —————————- | ————————————————-- |
| Output | Audio | Output channel |
Configurable Parameters
No configurable Parameters
DSP Parameters
NO DSP parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/abinoutcondition.txt · Last modified: 06 May 2021 12:10 by Krithika Manchale