This version is outdated by a newer approved version.
This version (05 Jun 2020 10:26) is a draft.
Approvals: 0/1
This version (05 Jun 2020 10:26) is a draft.Approvals: 0/1
This is an old revision of the document!
Table of Contents
Click here to return to the Arithmetic and Logic page
AB-In CD-Out Condition
Description
The AB In-CD Out Condition block lets you compare the sample-by-sample level of two incoming signals (A & B) and output the sample of one of two new signals (C & D), depending on the condition.
This algorithm works only for DSP's with conditional instruction.
Usage
Click the icon in the block to select the condition you want to check:
- greater than
- less than
- greater than or equal to
- less than or equal to
When the condition is true, output sample is C; otherwise, it's D.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| ABInCDOutCondition | Yes | Yes | Yes | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Input0 | Audio | Input channel 0 (Input Signal A) |
| Input1 | Audio | Input channel 1 (Input Signal B) |
| Input2 | Audio | Input channel 0 (Input Signal C) |
| Input3 | Audio | Input channel 1 (Input Signal D) |
Output
| Output | Audio | Output channel |
Configurable Parameters
No configurable parameter
DSP Parameters
NO DSP parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/abincdoutcondition.1591345582.txt.gz · Last modified: 05 Jun 2020 10:26 by Nikhin Shetty