This version (18 May 2021 08:40) was approved by John Joseph.The Previously approved version (05 Jun 2020 07:17) is available.
Table of Contents
Click here to return to the ADI Algorithms page
GALA Gain
Description
In GALA Gain block, the gain applied to the input signal varies with the changes in the control input(Speed/Engine noise).
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| GALA Gain | B | B | NA |
Pins
Input
| Name | Type | Description | |
|---|---|---|---|
| ———————- | ————-- | ———————- | |
| SpeedInput | Control | Speed or Engine Noise | |
| Input0 | Audio | Input Channel0 | |
Output
| Name | Type | Description |
|---|---|---|
| ———————- | ————-- | ———————- |
| Output0 | Audio | Output channel0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| —————————————- | ———————- | —————— | —————————————- |
| Slope | 0.01 | 0.01 to 1.0 | It is used to multiply with the control input |
| DBGain | 0.1 | 0.0 to 15.0 dB | Scales the input signal |
| NumChannels | 1 | 20 | Number of input and output channels. Change in this value requires re-compilation |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx |
|---|---|---|
| —————————————- | —————————————————————————————- | —————————————- |
| Slope | Scales the speed(Control input) | Float |
| DBGain | Scales the input signal | Float |
| RampUpSlew | Rate of smooth transition of signal from low level to high level | Float |
| RampDownSlew | Rate of smooth transition of signal from high level to low level | Float |
DSP Parameter Computation
RampUpSlew = 10^(1/(FS * 20))
RampDownSlew = 10^(-3/(FS * 20))
resources/tools-software/sigmastudiov2/modules/adialgorithms/galagain.txt · Last modified: 11 May 2021 09:21 by John Joseph