Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.

[[resources:tools-software:sigmastudiov2:gettingstarted:adsp-215xx_and_adsp-sc5xx|Return to parent page]]

======EV-SC594-SOM======

=====Connections=====

{{:resources:tools-software:sigmastudiov2:gettingstarted:sc594-som.png?nolink&600|}}
\\
EV-SC594-SOM with EV-SOM-CRR EZ-Kit Connections 
\\
\\
=====Settings=====

The board settings for running SigmaStudio+ EV-SC594-SOM with EV-SOM-CRR EZ-Kit, using the Default Application is given in the below tables.
^ Switch ^ Setting ^
|SW1|BOOT Mode Switch Default Position 0|
Switch Settings for EV-SC594-SOM Board
\\
\\
^ Jumper ^ Setting ^
|JP1|2-3 connected|
Jumper Settings for EV-SC594-SOM Board
\\
\\
^ Port ^ Setting ^
|P1|Debug port connected to ADZS-ICE-2000/ICE-1000|
Port Settings for EV-SC594-SOM Board
\\
\\
^ Switch ^ Setting ^
|SW1 (CRR)|OFF, OFF, OFF, OFF, OFF, OFF|
Switch Settings for EV-SOM-CRR EZ-Kit
\\
\\
^ Jumper ^ Setting ^
|JP1|Not connected|
|JP2|Not connected|
Jumper Settings for EV-SOM-CRR EZ-Kit
\\
\\
^ Port ^ Setting ^
|P3|Connected with SigmaStudio USBi|
|P8|Connected to Power|
|J3(SOMCRR) – J2 (SOM)|Connected|
|J6(SOMCRR) – J1 (SOM)|Connected|
|J5(SOMCRR) – J2 (SOM)|Connected|
Port Settings for EV-SOM-CRR EZ-Kit

Analog Devices Wiki

Page Tools