Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
~~NOTOC~~
======Short Parameter Name support for Export file (PARAM.h) ======
Parameter names(#defines) in the PARAM.h export file is too long sometimes. The following example shows an long export name. 


#define MOD_<fc #ff0000><<Heirarchy Board Names separated by _>></fc>_<fc #800080><<Module Label>></fc>_ALG<fc #008080><<Algorithm Index>></fc>_<fc #6495ed><<AlgorithmInternalName>></fc><AlgorithmInstanceNumber>>_<fc #800000><<ParameterName>></fc>_ADDR 
 
When the short parameter name is enabled the parameter will be shortened as follows.\\
#define ADDR_<fc #4682b4><<Module Label>></fc>_<fc #008000><<ParameterName>></fc> 

(e.g)
**Original Name:**\\
#define MOD_<fc #ff0000>BOARD1</fc>_<fc #800080>COMPRESSOR1</fc>_ALG<fc #008080>0</fc>_<fc #4682b4>TWOCHANRMSNOPOSTGAINS300FULLRANGE</fc>1<fc #800000>POINTS0</fc>_ADDR

**Short Name:**\\
#define ADDR_<fc #6495ed>COMPRESSOR1</fc>_<fc #008000>POINTS0</fc>

This option available under Action Menu. 

{{ :resources:tools-software:sigmastudio:usingsigmastudio:action.jpg?nolink |}}

<note important>Parameter names in export may not be unique when 'Short Parameter Name for Export' option is enabled in the following cases. \\
1. Same module label is used across multiple hierarchy boards in the schematic.\\
</note>
Analog Devices Wiki

Page Tools
