This version (31 Jul 2012 22:41) was approved by Brett Gildersleeve.The Previously approved version (30 Jul 2012 22:32) is available.
Adjustable Volume Control
Click here to return to the Volume Controls section.
| This block lets you control which slew curve, and which time constant for the slew algorithm, to use. |  |
Choose slew type using the top drop-down control, Linear, Const[ant] dB, and RC-type:
- Linear: Slews to target using a fixed step size. The ramp ranges from 6.75 to 213.4 ms.
- Constant dB: Slews to target using the current value to calculate the step size. The resulting curve has a constant rise and decay when measured in dB. The ramp ranges from 6.1 ms to 1.27 s.
- RC-type: Slews to target using the difference between the target and current values to calculate the step size. This produces a simple RC-type curve for both rising and falling. The ramp ranges from 6.1 ms to 1.27 s.
With the bottom drop-down control, choose a time-constant value between 0 (fastest volume change) and -15 (slowest volume change). The default block comes with the Gain slew algorithm; right-click the block border or title, per usual, to add input/output pins. The slider controls the input(s) / output(s) the same, and the time constant applies to all inputs. The example at above right shows the default block with one algorithm added.
resources/tools-software/sigmastudio/toolbox/volumecontrols/adjustableslewcontrol.txt · Last modified: 31 Jul 2012 22:41 by Brett Gildersleeve