Wiki

This version (02 Jan 2023 10:19) was approved by ananthakalyani Sankar.

Balance Fader

Description

The Balance fader blocks is used to adjust the strength of the audio level between the left and right channels and fade out of the audio level between the front and rear channels.

Targets Supported

Name ADSP-214xx ADSP-215xx/SC5xx ADAU145x/146x
Balance Fader NA Block NA


Pins

Input

NameTypeDescription
FrontRight_InputAudioFront right channel input to the balance fader
FrontLeft_InputAudioFront left channel input to the balance fader
RearRight_InputAudioRear right channel input to the balance fader
RearLeft_InputAudioRear left channel input to the balance fader
Center_InputAudioCenter channel input to the balance fader
SW_InputAudioSub woofer input to the balance fader

Output

NameTypeDescription
FrontRight_OutputAudioFront right channel output from the balance fader
FrontLeft_OutputAudioFront left channel output from the balance fader
RearRight_OutputAudioRear right channel output from the balance fader
RearLeft_OutputAudioRear left channel output from the balance fader
Center_OutputAudioCenter channel output from the balance fader
SW_OutputAudioSub woofer output from the balance fader


Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
Balance0 -10 to 10Controls the balance of audio level between the left and right channels
Fade0-10 to 10Controls the fade out of audio level between the front and rear channels.
StepSize118 to 16Controls the smooth transition of change in audio level


DSP Parameters

Parameter Name Description ADSP-214xx/SC5xx/215xx ADAU145x/146x
BalanceBalance of audio level between the left and right channelsFloat NA
FadeFade out of audio level between the front and rear channelsFloat NA
StepSizeAllows smooth transition of change in audio levelFloat NA
BalanceFadeDBVal Constant valuesFloat NA


resources/tools-software/sigmastudio/toolbox/mixerssplitters/balancefader.txt · Last modified: 02 May 2022 13:57 by ananthakalyani Sankar