Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
[[resources:tools-software:sigmastudio:toolbox:miscelleneous|Click here to return to the miscelleneous page]]\\
\\

======PCMx to PCM======

\\
PCMx to PCM conversion will have PCMx format which will have 3 * Schematic Block Size
number of samples. The output is a control signal, which will carry the header information passed
by the PCMx signal, and 2 Data (PCM) pins, each carrying a Schematic Block Size Linear PCM
data (since PCMx signal contains Schematic Block Size of header information and 2 * Schematic
Block Size of valid sample information). The output pins can be grown and should be in such a way
that the no. of output pins (or the growth count) is always a power of 2. By default the growth count
is 2 and the no. of output pins is also 2. 
\\
{{:resources:tools-software:sigmastudio:toolbox:miscelleneous:pcmxtopcm-tbx.jpg|}}
\\
\\
====Input Pins====
^Name^Format [int/dec] - [control/audio]^Function Description^
|Pin 0: Input | decimal- PCMx| PCMx input of size 3* Block Size|
\\
====Output Pins====
^Name^Format [int/dec] - [control/audio]^Function Description^
|Pin 0: Output1 |decimal - Control  | Control signal with header information of the PCMx signal|
|Pin 1: Output2 |decimal - PCM data | Linear PCM data of Block size|
|Pin 2: Output3 |decimal - PCM data | Linear PCM data of Block size|
\\
==== Grow Algorithm ====
The module does not support Add. The module supports growth. When grown to a growth count of 'r' the number of samples in each PCM output is given by (2* block size)/r. 
\\
\\
====Configuration====
\\
{{:resources:tools-software:sigmastudio:toolbox:miscelleneous:pcmxtopcm-gui.jpg|}}
\\
^GUI Control Name^Default Value^Range^Function Description^
|-| -|-| -|
\\
\\
====DSP Parameter Information====
^GUI Control Name^Compiler Name^Function Description^
|-|-|-|
\\

\\
==== Algorithm Description ====
PCMx to PCM conversion will have PCMx format which will have 3 * Schematic Block Size
number of samples. The output is a control signal, which will carry the header information passed
by the PCMx signal, and 2 Data (PCM) pins, each carrying a Schematic Block Size Linear PCM
data (since PCMx signal contains Schematic Block Size of header information and 2 * Schematic
Block Size of valid sample information). The output pins can be grown and should be in such a way
that the no. of output pins (or the growth count) is always a power of 2. By default the growth count
is 2 and the no. of output pins is also 2. 
\\
==== Supported ICs ====
  - ADSP215xx
  - ADSPSC5xx
Analog Devices Wiki

Page Tools
