This version (30 Jun 2017 10:56) was approved by Venkatesan Krishnamoorthy.

Register Read

Click here to return to the Basic DSP section.

This module reads any user accessible register from the DSP and gives out in the output Pin.

Input Pins


Output Pins

NameFormat [int/dec] - [control/audio]Function Description
Pin 1: Outputint- control Value read at the register address.

Grow Algorithm

The module currently supports growth. Both the control and pins are grown for each growth. Add algorithm functionality is not supported. The figure below shows the module when grown for 5.


GUI Control NameDefault ValueRangeFunction Description
Register Address 0xF000 0xF000 - 0xF890Register Address to be read.

Note: Address control will be repeated for each channels when grown. And address can be specified either in hexadecimal or decimal.

DSP Parameter Information

GUI Control NameCompiler NameFunction Description
MuteRegisterReadAlg1address0Register Address


  • Green - Algorithm Name
  • Red - Instance Number (Changes for each instance)
  • Blue - Parameter Name
  • Brown - Growth Number (Changes for each register address when grown)

Supported ICs

  1. ADAU145x
resources/tools-software/sigmastudio/toolbox/basicdsp/registerread.txt · Last modified: 28 Mar 2017 13:22 by Venkatesan Krishnamoorthy