Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
====== Parameter Read ======
[[:resources:tools-software:sigmastudio:toolbox:basicdsp|Click here to return to the Basic DSP.]]\\
||
This module can be used to read any parameter in the schematic and get the value in the output pin.
\\
{{ :resources:tools-software:sigmastudio:toolbox:basicdsp:paramread.png?nolink |}}
\\



===== Input Pins =====
None
\\
===== Output Pins =====
^Name^Format [int/dec] - [control/audio]^Function Description^
|Pin 0: Output|float- control|Read parameter value is sent as float value|

\\

===== Grow Algorithm =====
Not supported
\\
\\
===== Configurations =====
After adding the module. Press 'Link compile connect' once to ensure all the addresses are proper. Then click on the select button to open the following window. 

\\
{{ :resources:tools-software:sigmastudio:toolbox:basicdsp:paramreadwnd.jpg?nolink |}}
\\


^GUI Control Name^     Default Value    ^    Range    ^Function Description^
|Block Name| Not Applicable|Not Applicable|Name of the module in the schematic|
|Parameter Name|Not Applicable| Not Applicable|Name of the parameter in the selected module.|
|Address|0| Not Applicable|Address of the parameter. If the user wants to enter the address directly click on the checkbox and change it|
|Offset|0| Not Applicable |This offset is added to the address, then that is used as the address to read the parameter from |
|Data Type| float |float/int  |Data type of the parameter.|

=====DSP Parameter Information=====
^GUI Control Name^Compiler Name^Function Description^
|Address|<fc #008000>ParamReadAlg</fc><fc #ff0000>1</fc><fc #000080>Address</fc>|Address of the parameter |
|offset|<fc #008000>ParamReadAlg</fc><fc #ff0000>1</fc><fc #000080>Offset</fc>|Offeset from address |
|type|<fc #008000>ParamReadAlg</fc><fc #ff0000>1</fc><fc #000080>Type</fc>|0 - float, 1- int |

\\ Here, 
     * <fc #008000> Green</fc> - Algorithm Name
     * <fc #ff0000> Red</fc> - Instance Number (Changes for each instance)
     * <fc #000080> Blue</fc> - Parameter Name
===== Supported ICs =====
  - SC5xx
Analog Devices Wiki

Page Tools
