This version is outdated by a newer approved version.
This version (19 Dec 2017 10:53) was approved by Sanjeeva Reddy.The Previously approved version (19 Dec 2017 10:11) is available.
This version (19 Dec 2017 10:53) was approved by Sanjeeva Reddy.The Previously approved version (19 Dec 2017 10:11) is available.This is an old revision of the document!
Table of Contents
Min
Click here to return to the BasicDSP page
| The Min algorithm compares 2 (or more) inputs and outputs the input with the lowest value. |  |
Min and Hold
| The Min and Hold is a algorithm compares the input sample with held min value and outputs the lowest value. |
Input Pins
| Name | Format [int/dec/float] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Input | decimal- control | Reset signal to the module |
| Pin 1: Input | decimal- audio | Input signal to the module |
Output Pins
| Name | Format [int/dec/float] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Output | decimal- audio- audio | Output signal from the module |
Grow Algorithm
The module supports growth of Input channels up to 16 and one reset pin. Add Algorithm is not supported.
GUI Controls
No GUI Controls
DSP Parameter Information
No DSP parameters
Algorithm Description
This module compares the each channel input samples with held_min value and outputs lowest value when reset is Off. Compares the each channel input samples and outputs the lowest value when reset pin is high.
Supported IC's
1. ADAU145x
resources/tools-software/sigmastudio/toolbox/basicdsp/min.1513677111.txt.gz · Last modified: 19 Dec 2017 10:51 by Sanjeeva Reddy