This version is outdated by a newer approved version.
This version (19 Dec 2017 09:54) was approved by Sanjeeva Reddy.The Previously approved version (14 Nov 2012 23:24) is available.
This version (19 Dec 2017 09:54) was approved by Sanjeeva Reddy.The Previously approved version (14 Nov 2012 23:24) is available.This is an old revision of the document!
Table of Contents
Max
Click here to return to the BasicDSP page
| The Max algorithm compares 2 (or more) inputs and outputs the highest value. |  |
Block Max and Hold
| The Max and Hold is a block algorithm compares the input sample with held max value and outputs the highest value. |
Input Pins
| Name | Format [int/dec/float] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Input | decimal(ADAU145x)- control | Reset signal to the module |
| Pin 1: Input | decimal(ADAU145x)- audio | Input signal to the module |
Output Pins
| Name | Format [int/dec/float] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Output | decimal(ADAU145x)- audio- audio | Output signal from the module |
Grow Algorithm
The module supports growth of Input channels up to 16 and one reset pin. Add Algorithm is not supported.
GUI Controls
No GUI Controls
DSP Parameter Information
No DSP parameters
Algorithm Description
This module compares the each channel inputs samples in Block of input samples with held_max value and outputs highest value when reset is Off. Compares the each channel inputs samples in Block of input samples and outputs the highest value when reset pin is high.
Supported IC's
1. ADAU145x (IDspSigma300)
resources/tools-software/sigmastudio/toolbox/basicdsp/max.1513673480.txt.gz · Last modified: 19 Dec 2017 09:51 by Sanjeeva Reddy