Differences

This shows you the differences between two versions of the page.

--- resources:tools-software:sharc-audio-module:hardware:class-d [13 Feb 2020 18:46] – [+12v Input Power Jack (P3)] Chad Wentworth
+++ resources:tools-software:sharc-audio-module:hardware:class-d [03 Mar 2020 18:47] – Chad Wentworth
@@ Line 73: / Line 73: @@
 Two GPIO pushbuttons are provided on the A<sup>2</sup>B Class-D Amplifier Module. They are connected as follows:
-  * ''PB1'' is connected to ''IO1'' on AD2425W
+  * ''PB1'' is connected to ''IO1'' on AD2428W
-  * ''PB2'' is connected to ''IO2'' on AD2425W
+  * ''PB2'' is connected to ''IO2'' on AD2428W
 ===== GPIO LEDs (LED1, LED2) =====
@@ Line 80: / Line 80: @@
 There are two GPIO-controlled LEDs on the A<sup>2</sup>B Class-D Amplifier Module. They are connected as follows:
-  * ''LED1'' is connected to IO0 on the ''AD2425W''
+  * ''LED1'' is connected to IO0 on the ''AD2428W''
-  * ''LED2'' is connected to IO7 on the ''AD2425W''
+  * ''LED2'' is connected to IO7 on the ''AD2428W''
 ===== PDM/TDM Connectors =====

Wiki