Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
resources:tools-software:linux-software:iio_oscilloscope [26 Nov 2019 12:29] – [About] Michael Hennerichresources:tools-software:linux-software:iio_oscilloscope [16 Oct 2020 09:53] – [Running Remote] Cristian Pop
Line 78: Line 78:
   - Settings -> Connect and enter the IP address in the popup window, and click "OK" or "Refresh". {{ :resources:tools-software:linux-software:connect.png?300 |}}   - Settings -> Connect and enter the IP address in the popup window, and click "OK" or "Refresh". {{ :resources:tools-software:linux-software:connect.png?300 |}}
   - Settings -> Connect and click "Refresh" with a blank IP number. If your network supports [[http://avahi.org/|zeroconf]]((also referred to as multicast DNS/DNS-SD service discovery)), you will be connected to the device on the network.   - Settings -> Connect and click "Refresh" with a blank IP number. If your network supports [[http://avahi.org/|zeroconf]]((also referred to as multicast DNS/DNS-SD service discovery)), you will be connected to the device on the network.
 +The application can be used to connect to another platform that runs no-OS software:
 +https://wiki.analog.com/resources/tools-software/no-os-software/iio
    
  
resources/tools-software/linux-software/iio_oscilloscope.txt · Last modified: 18 Oct 2023 12:01 by Cristina Suteu

Page Tools