Differences

This shows you the differences between two versions of the page.

--- resources:tools-software:linux-software:colorimeter [29 Feb 2016 10:36] – syntax correction Mihai Ionut Suciu
+++ resources:tools-software:linux-software:colorimeter [29 Feb 2016 10:45] – syntax correction Mihai Ionut Suciu
@@ Line 64: / Line 64: @@
 {{ :resources:tools-software:linux-software:colorimeter_calibration.png?400|Calibration Dialog}}
-For optimum performance it is necessary to calibrate the application to the connected board and the environment. This calibration can be performed in the calibration dialog which can be opened form then application's menu. It allows to set the calibration parameters the LEDs and photo-diodes as well as performing a automated calibration.
+For optimum performance it is necessary to calibrate the application to the connected board and the environment. This calibration can be performed in the calibration dialog which can be opened from the application's menu. It allows to set the calibration parameters the LEDs and photo-diodes as well as performing a automated calibration.
 Calibration must be performed with distilled water in both the reference and the sample probes. It is also recommended that during calibration the photo-diodes are shielded from ambient light.

Wiki