Differences

This shows you the differences between two versions of the page.

--- resources:tools-software:linux-drivers:iio-adc:ad7124 [16 Oct 2018 13:23] – Sampling frequency description Stefan Popa
+++ resources:tools-software:linux-drivers:iio-adc:ad7124 [16 Oct 2018 13:29] – More Information Stefan Popa
@@ Line 119: / Line 119: @@
 **Description:**
 The output data rate depends on the master clock frequency (fclk) which in turn determines the power mode:\\
-  * Full power (fclk = 614.4 kHz): 9.38 SPS to 19,200 SPS
+  * Full power (fCLK = 614.4 kHz): 9.38 SPS to 19,200 SPS
   * Mid power (fCLK = 153.6 kHz): 2.34 SPS to 4800 SPS
   * Low power (fCLK = 76.8 kHz): 1.17 SPS to 2400 SPS
@@ Line 125: / Line 125: @@
 <WRAP box bggreen><wrap info>This specifies any shell prompt running on the target</wrap>
 <xterm>
-root:/sys/bus/iio/devices/iio:device0>
+root:/sys/bus/iio/devices/iio:device0> **cat in_voltage0-voltage1_sampling_frequency**
+
+root:/sys/bus/iio/devices/iio:device0> **cat in_voltage2-voltage3_sampling_frequency**
+
+root:/sys/bus/iio/devices/iio:device0> **echo 2400 > in_voltage0-voltage1_sampling_frequency**
+root:/sys/bus/iio/devices/iio:device0> **cat in_voltage0-voltage1_sampling_frequency**
+
+root:/sys/bus/iio/devices/iio:device0> **echo 5000 > in_voltage2-voltage3_sampling_frequency**
+root:/sys/bus/iio/devices/iio:device0> **cat in_voltage2-voltage3_sampling_frequency**
 </xterm></WRAP>
+====== More Information ======
+{{page>software:linux:docs:iio:iio_snippets#iio pointers&noheader&firstseconly&noeditbtn}}

Wiki