Differences

This shows you the differences between two versions of the page.

--- resources:tools-software:fm-radio [20 Feb 2014 17:12] – created Paul Cercueil
+++ resources:tools-software:fm-radio [18 Oct 2014 05:45] – [Monitoring the FM band] Jie Yan
@@ Line 9: / Line 9: @@
 **FM channels:**
   * either 200 kHz wide, with a frequency deviation limited to 150 kHz total,
-  * or 100 kHz wide, with a frequency deviation limited to 75 MHz total.
+  * or 100 kHz wide, with a frequency deviation limited to 75 KHz total.
 ===== The sysfs interface =====
@@ Line 66: / Line 66: @@
 {{:resources:tools-software:capture4.png?300|}}
-  * **RX LO Frequency**: the base frequency at which the hardware will be tuned. Set to 87.4 MHz (and not 87.5, since 87.5 is the middle of a 200 MHz channel);
+  * **RX LO Frequency**: the base frequency at which the hardware will be tuned. Set to 87.4 MHz (and not 87.5, since 87.5 is the middle of a 200 KHz channel);
   * **RF Baudwidth**: the size of the band you want to capture. Here, we want at least a band of 107.9 - 87.5 = 20.4 MHz
   * **Sampling rate**: the number of samples you want to capture (in millions per second). Here we set this to 22, so that we get a resolution of approximatively one hertz.

Wiki