Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
resources:tools-software:ace:knownissues [21 Aug 2019 12:46] – Ciaran Wattersonresources:tools-software:ace:knownissues [23 Aug 2019 17:55] – [High-Speed DAC Eval Boards are not discovered] Max Lehuraux
Line 13: Line 13:
  
  
-===== ACE Does Not Discover High-Speed DAC Eval Boards =====+===== High-Speed DAC Eval Boards are not discovered =====
  
 The High-Speed DAC boards have a second on-board USB controller, make sure this is connected as well as the main FPGA controller board. To avoid potential confusion, ACE only reports boards on the second controller (where it is required). The High-Speed DAC boards have a second on-board USB controller, make sure this is connected as well as the main FPGA controller board. To avoid potential confusion, ACE only reports boards on the second controller (where it is required).
  
 \\ \\
-There is also a known driver conflict issue between the NI VISA driver and Keysight's VISA driver (used for automation of equipment). To work around this, try setting the Keysight VISA driver as the secondary VISA driver. This can be done with the Keysight installer. If this doesn't work, you may need to uninstall the Keysight Driver.\\+As of version 1.14, ACE replaces the driver of the on-board controller to avoid any of the conflicts with VISA drivers listed below and installs the DPGDownloaderLite application to replace the High-Speed DAC Software Suite. 
 + 
 +However, at this time, some High-Speed DAC Eval Boards are not yet supported through ACE but through a dedicated SPI application that requires the NI VISA driver. 
 +The recommended action if you are actively using these High-Speed DAC Eval Boards with dedicated SPI applications is to not update to ACE version 1.14 or install version 1.13 available [[http://swdownloads.analog.com/ACE/ACEInstall_1.13.2728.1194.exe|here]].  
 + 
 +\\ 
 +For ACE version 1.13 and earlier, there is a known driver conflict issue between the NI VISA driver and Keysight's VISA driver (used for automation of equipment). To work around this, try setting the Keysight VISA driver as the secondary VISA driver. This can be done with the Keysight installer. If this doesn't work, you may need to uninstall the Keysight Driver.\\
 \\ \\
 The same workaround may be necessary for Rhode-Schwarz VISA. The same workaround may be necessary for Rhode-Schwarz VISA.
resources/tools-software/ace/knownissues.txt · Last modified: 22 Jan 2024 14:07 by Sid Balasubramanian

Page Tools