This version is outdated by a newer approved version.
This version (24 Nov 2022 10:31) is a draft.
Approvals: 0/1
This version (24 Nov 2022 10:31) is a draft.Approvals: 0/1
This is an old revision of the document!
Table of Contents
System Requirements
Software Requirements
- CrossCore Embedded Studio v2.10.0 or above. This can be downloaded from www.analog.com/cces
Hardware Requirements
* A2B Evaluation Board configured as Main
- EVAL-AD2428WD1BZ Rev1.1 package
- Evaluation Board
- 12V Power Supply 1.5A
- USB Type A Male - Mini Type B Male cable
- Twisted Pair A2B Cable with DuraClick connectors
- ADUSB2EBZ (USBi) board with USB cable (1.7m or 10m)
- 3.5mm Audio cable or male-male adapter
- EVAL-AD2435WA3LZ High Power A2B Main and LPS Rev B
- Evaluation Board
- 12V Power Supply
- Twisted Pair A2B Cable with Molex H-DAC connector
- EVAL-AD2433WA1BZStandard Power Main and LPS Rev B
- Evaluation Board
- 9V Power Supply
- Twisted Pair A2B Cable with DuraClick connector
- EVAL-AD2433WA1BZ Rev A
- Evaluation Board
- 12V Power Supply
- Twisted Pair A2B Cable with DuraClick connector
- ADUSB2EBZ (USBi) board with USB cable (1.7m or 10m)
- 3.5mm Audio cable or male-male adapter
- EVAL-AD2430WD1BZ Rev A
- Evaluation Board
- 12V Power Supply
- Twisted Pair A2B Cable with DuraClick connector
- ADUSB2EBZ (USBi) board with USB cable (1.7m or 10m)
- 3.5mm Audio cable or male-male adapter
- EVAL-AD2437WA1NZ Rev A
- Evaluation Board
- 24V Power Supply
- XLR Cable with connectors
- EVAL-ADUSB3EBZ (USBi) board with USB cable (1.7m or 10m)
* 1-3-Sub nodes
- EVAL-AD2428WB1BZ Rev2.0 package
- Evaluation Board EVAL-AD2428WB1BZ (Stereo In, Stereo Out, Stereo Microphones)
- Twisted Pair A2B Cable with DuraClick connectors (30cm or 4m)
- 3.5mm Audio cable or male-male adapter
- EVAL-AD2428WC1BZ Rev2.1 package
- Evaluation Board EVAL-AD2428WC1BZ (4 Microphones)
- Twisted Pair A2B Cable with DuraClick connectors (30cm or 4m)
- EVAL-AD2435WJ3LZ High Power A2B BPS node Rev B
- Evaluation Board EVAL-AD2435WJ3LZ (4 Microphones)
- Twisted Pair A2B Cable with Molex H-DAC connector (30cm or 4m)
- 3.5mm Audio cable or male-male adapter
- EVAL-AD2433WB1BZ Standard Power BPS node Rev A
- Evaluation Board EVAL-AD2433WB1BZ (4 Microphones)
- Twisted Pair A2B Cable with DuraClick connector
- 3.5mm Audio cable or male-male adapter
- EVAL-AD2430WC1BZRev A
- Evaluation Board EVAL-AD2430WC1BZ (4 Microphones)
- Twisted Pair A2B Cable with DuraClick connectors (30cm or 4m)
- EVAL-AD2437WB1NZ Rev A
- Evaluation Board EVAL-AD2437WB1NZ
- XLR Cables with connectors
- Passive Speakers.
resources/tools-software/a2bv2/quickstartguide/systemrequirements.1669282279.txt.gz · Last modified: 24 Nov 2022 10:31 by Gireesha Nirvanaiah