Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
resources:quick-start:adin2111_linux_quick_start_guide [21 Nov 2022 09:29] – Alexandru Tachiciresources:quick-start:adin2111_linux_quick_start_guide [05 Dec 2022 06:52] – Alexandru Tachici
Line 32: Line 32:
 In order to do this find S201 and set every switch to the following table: In order to do this find S201 and set every switch to the following table:
  
-^ SWTICH S1   ^ POSITION ^+^ SWITCH S1   ^ POSITION ^
 | SPI_CFG1  | OFF | | SPI_CFG1  | OFF |
 | SPI_CFG0  | ON  | | SPI_CFG0  | ON  |
  
-^ SWTICH S4   ^ POSITION ^+^ SWITCH S4   ^ POSITION ^
 | 1  | OFF | | 1  | OFF |
 | 2  | ON  | | 2  | ON  |
Line 115: Line 115:
 In order to do this find S201 and set every switch to the following table: In order to do this find S201 and set every switch to the following table:
  
-^ SWTICH S1   ^ POSITION ^+^ SWITCH S1   ^ POSITION ^
 | SPI_CFG1  | OFF | | SPI_CFG1  | OFF |
 | SPI_CFG0  | OFF  | | SPI_CFG0  | OFF  |
  
-^ SWTICH S4   ^ POSITION ^+^ SWITCH S4   ^ POSITION ^
 | 1  | OFF | | 1  | OFF |
 | 2  | ON  | | 2  | ON  |
Line 125: Line 125:
 | 4  | OFF | | 4  | OFF |
  
-Make sure IMX8MM-BB is set to boot from the SD Card, for more details go to [[https://www.nxp.com/document/guide/get-started-with-the-i-mx-8m-mini-evkb:GS-iMX-8M-Mini-EVK | Boot Swtich Setup]].+Make sure IMX8MM-BB is set to boot from the SD Card, for more details go to [[https://www.nxp.com/document/guide/get-started-with-the-i-mx-8m-mini-evkb:GS-iMX-8M-Mini-EVK | Boot Switch Setup]].
  
  
Line 303: Line 303:
 In order to do this find S201 and set every switch to the following table: In order to do this find S201 and set every switch to the following table:
  
-^ SWTICH S1   ^ POSITION ^+^ SWITCH S1   ^ POSITION ^
 | SPI_CFG1  | OFF | | SPI_CFG1  | OFF |
 | SPI_CFG0  | ON  | | SPI_CFG0  | ON  |
  
-^ SWTICH S4   ^ POSITION ^+^ SWITCH S4   ^ POSITION ^
 | 1  | OFF | | 1  | OFF |
 | 2  | ON  | | 2  | ON  |
Line 379: Line 379:
 | kernel/kernel-4.9/driver/drivers/net/ethernet/adi/Makefile | Linux 4.9 ethernet Makefile with the necessary adjustments | | kernel/kernel-4.9/driver/drivers/net/ethernet/adi/Makefile | Linux 4.9 ethernet Makefile with the necessary adjustments |
 | kernel/kernel-4.9/driver/drivers/net/ethernet/adi/Kconfig | Linux 4.9 ethernet Kconfig with the necessary adjustments | | kernel/kernel-4.9/driver/drivers/net/ethernet/adi/Kconfig | Linux 4.9 ethernet Kconfig with the necessary adjustments |
-| kernel/kernel-4.9/arch/arm64/configs/adi_tegra_defconfig | A modified tegra_defconfig with PHY + MAC + SWTICHDEV enabled |+| kernel/kernel-4.9/arch/arm64/configs/adi_tegra_defconfig | A modified tegra_defconfig with PHY + MAC + SWITCHDEV enabled |
 | kernel/kernel-4.9/scripts/Kbuild.include | Original Kbuild.include with a small bugfix see [[ https://forums.developer.nvidia.com/t/failed-to-make-l4t-kernel-dts/116399/9 | here details ]] | | kernel/kernel-4.9/scripts/Kbuild.include | Original Kbuild.include with a small bugfix see [[ https://forums.developer.nvidia.com/t/failed-to-make-l4t-kernel-dts/116399/9 | here details ]] |
 | kernel/kernel-4.9/include/uapi/linux/types.h | Original types.h with a compile error fixed. | | kernel/kernel-4.9/include/uapi/linux/types.h | Original types.h with a compile error fixed. |
resources/quick-start/adin2111_linux_quick_start_guide.txt · Last modified: 20 Oct 2023 08:40 by Ana-Maria Cusco

Page Tools