Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
resources:fpga:xilinx:fmc:ad9739a [11 Nov 2016 10:56] – align pictures for one, four and eight channels and reduce dimension for alert message on top of the page Lucian Sinresources:fpga:xilinx:fmc:ad9739a [29 Sep 2017 09:28] – [Quick Start Guide] Added ZC706 to the tested boards. Adrian Costina
Line 9: Line 9:
   * [[adi>EVAL-AD9739A| AD9739A-FMC ]]   * [[adi>EVAL-AD9739A| AD9739A-FMC ]]
  
-{{:resources:fpga:xilinx:fmc:ad9739a_fmc.jpg?300|}}+{{:resources:fpga:xilinx:fmc:ad9739a_fmc.jpg?400|}}
  
 <WRAP round 65% alert>The AD9739A FMC Card is not fully ANSI/VITA 57.1 compatible: <WRAP round 65% alert>The AD9739A FMC Card is not fully ANSI/VITA 57.1 compatible:
Line 19: Line 19:
 ===== Supported Carriers ===== ===== Supported Carriers =====
  
-  * [[xilinx>ML605]] +  * [[xilinx>ML605]] Legacy (limited support) 
-  * [[xilinx>KC705]]  +  * [[xilinx>KC705]] Legacy (limited support) 
-  * [[xilinx>VC707]]  +  * [[xilinx>VC707]] Legacy (limited support) 
-  * [[xilinx>AC701]]+  * [[xilinx>AC701]] Legacy (limited support) 
 +  * [[xilinx>ZC706]] LPC Slot
 ===== Quick Start Guide ===== ===== Quick Start Guide =====
  
-The reference design has been tested on ML605(Virtex-6), KC705(Kintex-7) and VC707(Virtex-7) boards. The notes below refer to ML605, however the procedure is same for the other boards. Please make sure that you have downloaded and are using the correct design files for your board. All you need is the hardware and a PC running a UART terminal. +The reference design has been tested on ML605(Virtex-6), KC705(Kintex-7), VC707(Virtex-7) and ZC706 (Zynq) boards. The notes below refer to ML605, however the procedure is same for the other boards. Currently, we fully support only the ZC706 Vivado based design. Please make sure that you have downloaded and are using the correct design files for your board. All you need is the hardware and a PC running a UART terminal. 
  
 {{analogTV>1423927819001}} {{analogTV>1423927819001}}
resources/fpga/xilinx/fmc/ad9739a.txt · Last modified: 12 Feb 2021 11:55 by Dan Nechita

Page Tools