Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
resources:eval:user-guides:mykonos:no-os-setup [04 Jun 2018 15:58] – Add KCU105 and ZCU102 platforms Dragos Bogdanresources:eval:user-guides:mykonos:no-os-setup [11 Sep 2018 13:15] – 2016_R2 -> master Dragos Bogdan
Line 127: Line 127:
    * The next step is to copy all the relevant source code into the **software** directory.     * The next step is to copy all the relevant source code into the **software** directory. 
    * **AD9371/AD9375 No-OS Software**    * **AD9371/AD9375 No-OS Software**
-      * Download from https://github.com/analogdevicesinc/no-OS/tree/2016_R2/ad9371/sw+      * Download from https://github.com/analogdevicesinc/no-OS/tree/master/ad9371/sw
       * Next copy the files intro the src folder of your newly created project. You can do this with Ctrl+C Ctrl+V or simple drag and drop       * Next copy the files intro the src folder of your newly created project. You can do this with Ctrl+C Ctrl+V or simple drag and drop
  
Line 205: Line 205:
   * Once DDS or DMA mode is selected and the project configuration can be ran.    * Once DDS or DMA mode is selected and the project configuration can be ran. 
   * Open an UART terminal, set the baud rate to 115200bps and make sure the initialization was completed, as in the screenshot bellow: {{ :resources:eval:user-guides:mykonos:nios_ii_console_done.png?nolink |}}   * Open an UART terminal, set the baud rate to 115200bps and make sure the initialization was completed, as in the screenshot bellow: {{ :resources:eval:user-guides:mykonos:nios_ii_console_done.png?nolink |}}
-  * Next, download the capture scripts from the [[https://github.com/analogdevicesinc/no-OS/tree/2016_R2/ad9371/scripts|git repository]]. +  * Next, download the capture scripts from the [[https://github.com/analogdevicesinc/no-OS/tree/master/ad9371/scripts|git repository]]. 
   * By running **capture.bat**, the **iq_rx1.csv** and **iq_rx2.csv** files will be generated inside the **nios2eds** folder   * By running **capture.bat**, the **iq_rx1.csv** and **iq_rx2.csv** files will be generated inside the **nios2eds** folder
   * Start [[http://www.analog.com/en/design-center/interactive-design-tools/visualanalog.html|VisualAnalog]] and open the **visual_analog.vac** file downloaded from the git repository.    * Start [[http://www.analog.com/en/design-center/interactive-design-tools/visualanalog.html|VisualAnalog]] and open the **visual_analog.vac** file downloaded from the git repository. 
resources/eval/user-guides/mykonos/no-os-setup.txt · Last modified: 09 Mar 2021 21:39 by Dragos Bogdan

Page Tools