Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:inertial-mems:imu:legacy-imu-breakout [17 Sep 2013 15:42] – created Mark Looney
+++ resources:eval:user-guides:inertial-mems:imu:legacy-imu-breakout [20 Jan 2014 20:30] – [ADIS16IMU1/PCBZ] Mark Looney
@@ Line 1: / Line 1: @@
+====LEGACY BREAKOUT BOARD WIKI GUIDE=====
+====OVERVIEW====
+Historically, the ADIS1613x, ADIS163xx and ADIS164xx products have used three different breakout board designs: the [[http://www.analog.com/en/evaluation/eval-adis16imu1/eb.html|ADIS16IM1/PCBZ]], ADIS16350/PCBZ and ADIS16135/PCBZ.  All other breakout board part numbers have included one of these three boards. The primary purpose for these breakout boards has been to simplify connection with existing processor systems, while engineers can design their own embedded system boards to directly attach to these IMU/gyroscope products. In order to help reduce confusion in the order process, ADI is in the process of standardizing the accessories for each of these product families. This process has caused many products to be taken off of the market and will result in additional part number reduction. This Wiki Guide will provide links to historical design data, along with provide the latest on our "standardization process."
+====ADIS16IMU1/PCBZ====
+The [[http://www.analog.com/en/evaluation/eval-adis16imu1/eb.html|ADIS16IM1/PCBZ]] is an accessory that provides support for the ADIS1613x, ADIS163xx and ADIS1644x product families.
+For a list of products that the [[http://www.analog.com/en/evaluation/eval-adis16imu1/eb.html|ADIS16IM1/PCBZ]] connects directly to, visit the [[http://www.analog.com/en/evaluation/eval-adis16imu1/eb.html|Product Details]] section of the [[http://www.analog.com/en/evaluation/eval-adis16imu1/eb.html|ADIS16IM1/PCBZ]] product page.
+For [[http://www.analog.com/en/evaluation/eval-adis16imu1/eb.html|ADIS16IM1/PCBZ]] details, visit the [[http://wiki.analog.com/resources/eval/user-guides/inertial-mems/imu/adis16imu1-pcb|ADIS16IM1/PCBZ Wiki Guide]]
+====OBSOLETE ADIS16XXX/PCBZ DOCUMENTATION====
+For those who are looking for information on evaluation tool products, which are no longer available, here you go!
+[[adi>en/mems-sensors/mems-inertial-sensors/adis16362/products/EVAL-ADIS16362/eb.html|ADIS16362/PCBZ Evaluation Tool Web Page]]
+[[adi>en/mems-sensors/mems-inertial-sensors/adis16364/products/EVAL-ADIS16364/eb.html|ADIS16364/PCBZ Evaluation Tool Web Page]]
+[[adi>en/mems-sensors/mems-inertial-sensors/adis16365/products/EVAL-ADIS16365/eb.html|ADIS16365/PCBZ Evaluation Tool Web Page]]
+[[adi>en/mems-sensors/mems-inertial-sensors/adis16367/products/EVAL-ADIS16367/eb.html|ADIS16367/PCBZ Evaluation Tool Web Page]]
+[[adi>en/mems-sensors/mems-inertial-sensors/adis16405/products/EVAL-ADIS16405/eb.html|ADIS16405/PCBZ Evaluation Tool Web Page]]
+[[adi>en/mems-sensors/mems-inertial-measurement-units/adis16407/products/EVAL-ADIS16407/eb.html|ADIS16407/PCBZ Evaluation Tool Web Page]]
+====ADIS16350/PCBZ DESIGN====
+The original IMU breakout board supported our very first Inertial Measurement Unit product, the ADIS16350. This board provides a simple connector translation function.
+{{:resources:eval:user-guides:inertial-mems:imu:365et_pcb.jpg?500|}}
+**__Legacy ADIS16135/PCBZ Layout__**
+{{:resources:eval:user-guides:inertial-mems:imu:adis16350-pcb-legacy-1.png?500|}}
+**__Legacy ADIS16135/PCBZ J1 & J2 Pin Assignments__**
+{{:resources:eval:user-guides:inertial-mems:imu:adis16135-pcb-legacy-2.png?500|}}
+**__Current Usage__**
+While we plan to phase this board out, it is still used in the following products: ADIS16300/PCBZ, ADIS16305/PCBZ, ADIS16334/PCBZ, ADIS16360/PCBZ, ADIS16362/PCBZ, ADIS16364/PCBZ, ADIS16365/PCBZ, ADIS16367/PCBZ, ADIS16400/PCBZ, ADIS16407/PCBZ, ADIS16445/PCBZ and ADIS16448/PCBZ.
+**__Legacy Usage__**
+This design was also used in the following products, which are no longer available: ADIS16350/PCBZ, ADIS16354/PCBZ and ADIS16355/PCBZ.
+====ADIS16135/PCBZ (LEGACY DESIGN)====
+The original ADIS16135/PCBZ breakout board design used two different ribbon cable connectors.
+**__Legacy ADIS16135/PCBZ Layout__**
+{{:resources:eval:user-guides:inertial-mems:imu:adis16135-pcb-legacy-1.png?500|}}
+**__Legacy ADIS16135/PCBZ J1 & J2 Pin Assignments__**
+{{:resources:eval:user-guides:inertial-mems:imu:adis16135-pcb-legacy-2.png?500|}}
+**__Legacy ADIS16135/PCBZ Electrical Schematic__**
+{{:resources:eval:user-guides:inertial-mems:imu:adis16135-pcb-legacy-3.png?500|}}
+This PCB design served the oldest version of the following breakout board products, all of which are now obsolete:
+ADIS16133/PCBZ, ADIS16135/PCBZ, ADIS16385/PCBZ

Analog Devices Wiki

Differences

Page Tools