Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:inertial-mems:imu:adis16imu2-pcb [01 Dec 2017 16:59] – [ELECTRICAL SCHEMATIC] Mark Looney
+++ resources:eval:user-guides:inertial-mems:imu:adis16imu2-pcb [19 Oct 2023 17:52] (current) – [GENERAL DESCRIPTION] Mark Looney
@@ Line 1: / Line 1: @@
 ====== ADIS16IMU2/PCBZ Breakout Board Wiki-Guide ======
 =====GENERAL DESCRIPTION=====
-The ADIS16IMU2/PCBZ is a breakout board that provides the ability to connect with the following products, using a standard ribbon cable (16-pin, 1mm pitch): [[adi>ADIS16334|ADIS16334]], [[adi>ADIS16362|ADIS16362]], [[adi>ADIS16364|ADIS16364]], [[adi>ADIS16365|ADIS16365]], [[adi>ADIS16367|ADIS16367]], [[adi>ADIS16405|ADIS16405]], [[adi>ADIS16407|ADIS16407]], [[adi>ADIS16445|ADIS16445]].  This breakout board simplifies connection to an embedded processor system, early in the development cycle and also connects this products to the EVAL-ADIS2 evaluation system.
+The ADIS16IMU2/PCBZ is a breakout board that provides the ability to connect with the following products, using a standard ribbon cable (16-pin, 1mm pitch): [[adi>ADIS16334|ADIS16334]], [[adi>ADIS16362|ADIS16362]], [[adi>ADIS16364|ADIS16364]], [[adi>ADIS16365|ADIS16365]], [[adi>ADIS16367|ADIS16367]], [[adi>ADIS16405|ADIS16405]], [[adi>ADIS16407|ADIS16407]], [[adi>ADIS16445|ADIS16445]].  This breakout board simplifies connection to an embedded processor system, early in the development cycle and also connects this products to the [[adi>EVAL-ADIS-FX3|EVAL-ADIS-FX3]] or EVAL-ADIS2 (obsolete) evaluation systems.
 {{:resources:eval:user-guides:inertial-mems:imu:adis16imu2_wiki_pcb_00.jpg?200|}}
@@ Line 9: / Line 9: @@
-=====SETUP WITH ADIS16334 & ADIS1644x IMUS=====
+=====SETUP WITH ADIS1633X/44X IMUS=====
 Connecting the IMU (ADIS16334, ADIS16445 or ADIS16448), ADIS1644X/FLEX and ADIS16IMU2 together is a very simple two-step process. Please note that the pin numbers markings on the ADIS1644X/FLEX were incorrect in early manufacturing lots. Please ignore the pin number markings on the ADIS1644X/FLEX and use the following instructions to guide the connection process.
@@ Line 18: / Line 18: @@
 {{:resources:eval:user-guides:inertial-mems:imu:adis16imu2_wiki_adis1644x_flex_02.png?500|}}
-<WRAP alert>**WARNING!** The connector pin numbers on the ADIS1644X/FLEX do not match the pin assignments on the ADIS1633x, ADIS1644x IMUs or ADIS16IMU2/PCBZ breakout boards.</WRAP>
 The following diagram shows the IMU's interface connector, which the ADIS1644X/FLEX connects with:
@@ Line 54: / Line 52: @@
 For more information on proper handling of the ADIS1636x and ADIS1640x packages, please consult [[adi>media/en/technical-documentation/application-notes/AN-1045.pdf|AN-1045]]
 =====KEY PHYSICAL DIMENSIONS=====
-Please see the following diagram for dimensions of the key physical attributes in the ADIS1644X/FLEX:
+Please see the following diagram for dimensions of all key physical attributes:
-COMING SOON....
+{{:resources:eval:user-guides:inertial-mems:imu:adis16imu2_pcb_dimensions.png?300|}}
-=====INTERFACE CONNECTORS=====
+=====INTERFACE CONNECTOR=====
+J1 is the electrical connector that provides direct access to power, ground and critical digital I/O pins on the devices. It is a 16-pin, dual-row, 2-mm pitch connector that support 1mm ribbon cable systems.
-COMING SOON.....
 ===Pin Assignments===
-COMING SOON....
+Here is the pin assignments for J1, which is the connector that will interface with an embedded processor board.
+{{:resources:eval:user-guides:inertial-mems:imu:adis16imu1-pcb-j1-connector.png?200|}}
 ===Ribbon Cable Options===
@@ Line 74: / Line 73: @@
 =====ELECTRICAL SCHEMATIC======
-COMING SOON....
+{{:resources:eval:user-guides:inertial-mems:imu:adis16imu1-pcb-schematic.png?400|}}
 =====SUPPORT=====

Analog Devices Wiki

Differences

Page Tools