| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| resources:eval:user-guides:inertial-mems:imu:adis16imu1-pcb [21 Aug 2019 03:33] – [Connector Part Numbers] Mark Looney | resources:eval:user-guides:inertial-mems:imu:adis16imu1-pcb [16 Jun 2021 17:32] (current) – [ADIS16490, ADIS16495, ADIS16497 Mounting] : Changed JP1 head back. Last change was a mistake. Still kept the update to the title text. Mark Looney |
|---|
| ===== IMU/GYROSCOPE MOUNTING HOLES ===== | ===== IMU/GYROSCOPE MOUNTING HOLES ===== |
| |
| The ADIS16IMU1/PCBZ provides several sets of mounting holes that line up with mounting holes and tabs on the following products: ADIS1613x, ADIS1636x, ADIS16375, ADIS1640x and ADIS1648x products. Please see the following picture for device mounting hole locations. | The ADIS16IMU1/PCBZ provides several sets of mounting holes that line up with mounting holes and tabs on the following products: ADIS1613x, ADIS1636x, ADIS16375, ADIS1640x ADIS1648x and ADIS1649x products. Please see the following picture for device mounting hole locations. |
| |
| {{:resources:eval:user-guides:inertial-mems:imu:adis16imu1_pcb_basicdimensions.png?800|}} | {{:resources:eval:user-guides:inertial-mems:imu:adis16imu1_pcb_basicdimensions.png?800|}} |
| The mounting holes are presently tapped for use with M2x0.4mm. While the pre-tapped holes provide convenience in the mounting process, they also constrain the mounting hole location in a manner that can result in a translational force on the electrical connector. This violates one of the "best-practice" criteria in the product datasheets and can impact key bias stability behaviors. For those who want to preserve best performance, open the diameter of these holes to 2.85mm and use a washer/nut combination on the backside of the interface board to secure the ADIS1648x to its surface. | The mounting holes are presently tapped for use with M2x0.4mm. While the pre-tapped holes provide convenience in the mounting process, they also constrain the mounting hole location in a manner that can result in a translational force on the electrical connector. This violates one of the "best-practice" criteria in the product datasheets and can impact key bias stability behaviors. For those who want to preserve best performance, open the diameter of these holes to 2.85mm and use a washer/nut combination on the backside of the interface board to secure the ADIS1648x to its surface. |
| |
| [[ez>docs/DOC-10634|Click here to see learn more about "best-practices" in mounting the ADIS1648x]] | [[ez>mems/w/documents/4440/faq-adis1648x-mounting-tips|Click here to see learn more about "best-practices" in mounting the ADIS1648x]] |
| |
| Here is an example of the ADIS16IMU1/PCBZ, with an ADIS16485AMLZ mounted to it. | Here is an example of the ADIS16IMU1/PCBZ, with an ADIS16485AMLZ mounted to it. |
| {{:resources:eval:user-guides:inertial-mems:imu:eval-adis2_wikiguide_bb_004c.jpg?430|}} | {{:resources:eval:user-guides:inertial-mems:imu:eval-adis2_wikiguide_bb_004c.jpg?430|}} |
| |
| =====JP1 Settings===== | ===== JP1 Settings by DUT Model ===== |
| |
| JP1 controls the power supply to teh VDDRTC function, on the ADIS16375, ADIS16480, ADIS16485 and ADIS16488A products. For all other products, do not install JP1. | JP1 controls the power supply to the VDDRTC function on the ADIS16375 and all parts in the ADIS1648x family, including the ADIS16485 and ADIS16488A. For all other products, do not install JP1. |
| | |
| Please use the following table to determine how to use JP1 on the ADIS16IMU1/PCBZ. | Please use the following table to determine how to use JP1 on the ADIS16IMU1/PCBZ. |
| |
| ==== Ribbon Cable Options ==== | ==== Ribbon Cable Options ==== |
| Check out the [[https://www.samtec.com/products/tcsd|TCSD series]] from [[https://www.samtec.com|Samtec]], to purchase ribbon cable assemblies, which will mate to J1, on the [[https://www.analog.com/EVAL-adis16imu1||ADIS16IMU1/PCB]] and the [[https://www.analog.com/EVAL-ADIS2|EVAL-ADIS2]]. | Check out the [[https://www.samtec.com/products/tcsd|TCSD series]] from [[https://www.samtec.com|Samtec]], to purchase ribbon cable assemblies, which will mate to J1, on the [[adi>EVAL-adis16imu1||ADIS16IMU1/PCB]] and the [[adi>EVAL-ADIS2|EVAL-ADIS2]]. |
| |
| |
