This version is outdated by a newer approved version.
This version (14 Oct 2016 02:21) was approved by Mark Looney.The Previously approved version (07 Oct 2016 01:20) is available.
This version (14 Oct 2016 02:21) was approved by Mark Looney.The Previously approved version (07 Oct 2016 01:20) is available.This is an old revision of the document!
Table of Contents
ADIS16ACL1/PCBZ Breakout Board Wiki-Guide
OVERVIEW
The ADIS16210 and ADIS16228 products all use a 15-pin flexible interface. The mating connector for their interface supports surface-mount solder attachment but does not support direct attachment with ribbon cables. For those who are would like to connect the ADIS16210 and ADIS16228 to an existing processor board, using a ribbon cable, the ADIS16ACL1/PCBZ provides a simple connector translation for this purpose.
ORDERING
To order this breakout board, please visit the ADIS16ACL1/PCBZ's web page at TBD…
ADIS16210/ADIS16228 Connection
Please see the video demonstration for connecting the ADIS16210 or ADIS16228 to its mating connector.
EVAL-ADIS2 Connection
The EVAL-ADIS2 provides PC-based evaluation support for the ADIS16210 and ADIS16228. J1 on the EVAL-ADIS2Z and the ADIS16ACL1/PCBZ use the same pin assignments, so connecting them requires a 16-pin ribbon cable.
Electrical Schematic
Outer Dimensions
Mounting Holes
resources/eval/user-guides/inertial-mems/imu/adis16acl1-pcb.1476404505.txt.gz · Last modified: 14 Oct 2016 02:21 by Mark Looney