This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
resources:eval:user-guides:eval-cog-ad3029lz:help_support [12 Aug 2017 07:45] – [CrossCore Embedded Studio questions] Pranit Jadhav | resources:eval:user-guides:eval-cog-ad3029lz:help_support [03 Jan 2021 21:46] (current) – fix links Robin Getz | ||
---|---|---|---|
Line 17: | Line 17: | ||
* The first thing to try in this case, is to [[resources: | * The first thing to try in this case, is to [[resources: | ||
* If drag and drop is not working, it may be necessary to erase the flash. To do so: | * If drag and drop is not working, it may be necessary to erase the flash. To do so: | ||
- | - Download and install the CrossCore Serial Flash Programmer from here: [[http:// | + | - Download and install the CrossCore Serial Flash Programmer from here: [[adi>en/ |
- Make sure that the USB is connected and on UART header (P8) 1 & 2 and 7 & 8 are shorted. | - Make sure that the USB is connected and on UART header (P8) 1 & 2 and 7 & 8 are shorted. | ||
- Power cycle the EV-COG-AD3029LZ board while holding down the boot switch. | - Power cycle the EV-COG-AD3029LZ board while holding down the boot switch. |