Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
resources:eval:user-guides:eval-adtf3175d-nxz:system_update [02 Feb 2023 18:52] – created Andre Straker-Payneresources:eval:user-guides:eval-adtf3175d-nxz:system_update [26 Feb 2024 16:28] (current) – removed nvm update details. Andre Straker-Payne
Line 1: Line 1:
 ====== System Update ====== ====== System Update ======
  
-This page covers the methods of updating the flash+This page covers the methods of updating the flash.
  
 ===== Firmware Update ===== ===== Firmware Update =====
  
 +Firmware can be updated via the bin file.
  
-===== Full Flash/NVM Update =====+In general, the data_collect executable is used to update the firmware. This can be done from the host or on the device.
  
-The imager module includes a flash/NVM that contains all firmware and calibration parameters for to enable the imager (ADSD3100 or ADSD3030) and the ADSD3500. +The firmware binary file for the latest version is available on the respective flash image. The binary file can also be obtained from the ADSD3500 installer. From the installer package, under the directory ADSD3500_Release_Firmware, the binary file required, in this case, for the 4.1.5 firmware release: 
- +  * Fw_Update_4.1.5.bin
-Updating the full flash should only be done if absolutely needed. +
- +
-==== Generating the Flash Image ==== +
- +
-==== Programming the Flash ====+
  
 +From the host:
 +<code>
 +cd "C:\Analog Devices\ADTF3175D\TOF_Evaluation_ADTF3175D-Rel4.1.1\bin"
 +data_collect --fw ..\image\NXP-Img-Rel4.1.1-ADTF3175D-0A8ED2B5\Fw_Update_4.1.5.bin --ip 10.42.0.1 tof-viewer_config.json
 +</code>
  
 +In either case wait for 60s before restarting the system.
resources/eval/user-guides/eval-adtf3175d-nxz/system_update.1675360355.txt.gz · Last modified: 02 Feb 2023 18:52 by Andre Straker-Payne

Page Tools