iOS Smart App Overview
IoTNode is iOS Smart Device App developed by Analog Devices Inc. to showcase example projects using EVAL-ADICUP3029.
iOS Device Minimum Requirement
Make sure you have an iOS device with following minimum requirement.
iOS Software Version: iOS 9.0 or higher.
System Memory: minimum 15MB
Bluetooth Version: v4 or higher
How to Download & Install IoTNode App on your iOS Device
Follow below instructions to download Analog Devices IoTNode app on iOS Device.
Go to App Store on your iOS Device.
Search IoTNode.
Tap “GET” and then “INSTALL”.
Wait until installation is successful.
How to use IoTNode
Follow below instructions to run the App.
Turn on device Bluetooth by navigating to Settings → Bluetooth → Turn Slider ON.
On the iOS homescreen navigate to
IoTNode and tap to open.
Once open, the app should automatically find Bluetooth devices within range, so you'll want to find and open the project you are working on.
Once connected, the app will provide you an option for which sensor(s) you are connected to that Bluetooth device.
It's usually only a single sensor, so make sure it's “Checked on” and hit “View Data”.
You are now connected, and data should start to display on the app.
Interfacing Data to IoTNode
The IoTNode app supports an easy to interface registration, configuration, and data packet system. For complete details on writing embedded code to interface to the IoTNode smart app, please check out the link below.