This version (30 Jul 2019 20:59) was approved by Brandon Bushey.The Previously approved version (08 Sep 2017 22:29) is available.Diff

iOS Smart App Overview

IoTNode is iOS Smart Device App developed by Analog Devices Inc. to showcase example projects using EVAL-ADICUP3029.

iOS Device Minimum Requirement

Make sure you have an iOS device with following minimum requirement.

  • iOS Software Version: iOS 9.0 or higher.
  • System Memory: minimum 15MB
  • Bluetooth Version: v4 or higher

How to Download & Install IoTNode App on your iOS Device

Follow below instructions to download Analog Devices IoTNode app on iOS Device.

  1. Go to App Store on your iOS Device.
  2. Search IoTNode.
  3. Tap “GET” and then “INSTALL”.

Wait until installation is successful.

Direct link to App Store

How to use IoTNode

Follow below instructions to run the App.

  1. Turn on device Bluetooth by navigating to Settings → Bluetooth → Turn Slider ON.
  2. On the iOS homescreen navigate to IoTNode and tap to open.
  3. Once open, the app should automatically find Bluetooth devices within range, so you'll want to find and open the project you are working on.
  4. Once connected, the app will provide you an option for which sensor(s) you are connected to that Bluetooth device.
    1. It's usually only a single sensor, so make sure it's “Checked on” and hit “View Data”.
  5. You are now connected, and data should start to display on the app.

Interfacing Data to IoTNode

The IoTNode app supports an easy to interface registration, configuration, and data packet system. For complete details on writing embedded code to interface to the IoTNode smart app, please check out the link below.

resources/eval/user-guides/eval-adicup3029/smart_app/ios_app.txt · Last modified: 30 Jul 2019 20:59 by Brandon Bushey