Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
resources:eval:user-guides:eval-adicup3029:reference_designs:demo_cn0414 [16 Nov 2018 14:08] – [Demo Requirements] Andrei Drimbareanresources:eval:user-guides:eval-adicup3029:reference_designs:demo_cn0414 [03 Mar 2021 02:55] (current) – [Obtaining the Source Code] adding in .Hex files Brandon Bushey
Line 1: Line 1:
 ====== PLC Arduino Shield Input Demo ====== ====== PLC Arduino Shield Input Demo ======
  
-The **ADuCM_demo_cn0414** project provides a solution to control a **PLC** or **DCS** input system using the **EVAL-CN0414-ARDZ** and the **EVAL-ADICUP3029**. It uses an **ADC** with 4 differential voltage channels and 4 current channels and boasts low power **Open-Wire Detection** capabilities and **HART** communication. It has a 32kb EEPROM memory that can also be used to identify the board and is controlled via a command line interface (**CLI**).+The **ADuCM3029_demo_cn0414** project provides a solution to control a **PLC** or **DCS** input system using the **EVAL-CN0414-ARDZ** and the **EVAL-ADICUP3029**. It uses an **ADC** with 4 differential voltage channels and 4 current channels and boasts low power **Open-Wire Detection** capabilities and **HART** communication. It has a 32kb EEPROM memory that can also be used to identify the board and is controlled via a command line interface (**CLI**).
  
 ===== General Description/Overview ===== ===== General Description/Overview =====
Line 7: Line 7:
 The **ADuCM_demo_cn0414** project uses **EVAL-CN0414-ARDZ** to provide a complete, fully isolated and highly flexible, four channel analog input system. The **EVAL-CN0414-ARDZ** is suitable for programmable logic controllers (**PLC**) and distributed control system (**DCS**) applications that require multiple voltage inputs. It boasts **open wire detection** and has **HART**-compatible, 4 mA to 20 mA current inputs, all protected from transient overvoltage or overcurrent events, suitable for the most harsh industrial environments. The **ADuCM_demo_cn0414** project uses **EVAL-CN0414-ARDZ** to provide a complete, fully isolated and highly flexible, four channel analog input system. The **EVAL-CN0414-ARDZ** is suitable for programmable logic controllers (**PLC**) and distributed control system (**DCS**) applications that require multiple voltage inputs. It boasts **open wire detection** and has **HART**-compatible, 4 mA to 20 mA current inputs, all protected from transient overvoltage or overcurrent events, suitable for the most harsh industrial environments.
  
-The circuit can be divided into the following parts: the ADC, the input channels, the HART modem and the memory.  +The circuit can be divided into the following parts: the ADC, the input channels, the HART modem and the memory.
-FIXME! MAYBE LINK TO APP NOTE+
  
 The **ADC** is the core of the **EVAL-CN0414-ARDZ** shield. It is an [[adi>AD4111]] with 8 single or 4 differential voltage channels and 4 current channels. The input channels in this application are configured as 4 differential voltage channels and the current channels. The application maintains 8 internal registers, one for each channel, that are updated periodically, on a timer interrupt, with the latest conversion results. This way, on a single read, the user can have the data on a channel without waiting for a conversion. The **ADC** is the core of the **EVAL-CN0414-ARDZ** shield. It is an [[adi>AD4111]] with 8 single or 4 differential voltage channels and 4 current channels. The input channels in this application are configured as 4 differential voltage channels and the current channels. The application maintains 8 internal registers, one for each channel, that are updated periodically, on a timer interrupt, with the latest conversion results. This way, on a single read, the user can have the data on a channel without waiting for a conversion.
Line 58: Line 57:
 ===== Outputting Data ===== ===== Outputting Data =====
  
-==== Serial Terminal Output ==== +{{page>/wiki/common#serial_terminal_setup&nofooter&noheader}}
- +
-The program outputs data and **CLI** interface to a serial terminal through **UART**. +
- +
-  - In order to view the data, you must flash the program to the EVAL-ADICUP3029. +
-  - Then follow the UART settings below with the serial terminal program. +
- +
-Following is the UART configuration. +
-    Select COM Port +
-    Baud rate: 115200 +
-    Data: 8 bit +
-    Parity: none +
-    Stop: 1 bit +
-    Flow Control: none +
-\\ +
-The terminal program must interpret new line as **LF** and **local echo** must be enabled.+
  
 ==== Available commands ==== ==== Available commands ====
Line 112: Line 96:
  
  
-===== Obtaining the Source Code =====+===== Obtaining the Software =====
  
-We recommend not opening the project directly, but rather import it into CrossCore Embedded Studios and make a local copy in your workspace. +There are two basic ways to program the ADICUP3029 with the software for the CN0414. 
 +  - Dragging and Dropping the .Hex to the Daplink drive 
 +  - Building, Compiling, and Debugging using CCES
  
-The source code and include files of the **ADuCM3029_demo_cn0414** can be found here:+Using the drag and drop method, the software is going to be a version that Analog Devices creates for testing and evaluation purposes.  This is the EASIEST way to get started with the reference design
  
-<WRAP round 80% download>+Importing the project into CrossCore is going to allow you to change parameters and customize the software to fit your needs, but will be a bit more advanced and will require you to download the CrossCore toolchain.  
  
-FIXME!  -  LINK+The software for the **ADuCM3029_demo_cn0414** can be found here:
  
-[[https://gitlab.analog.com/Platformation/EVAL-ADICUP3029/tree/cn0414_demo_dev/projects/ADuCM3029_demo_cn0414| AduCM3029_demo_cn0414 at Github]]+<WRAP round 80% download> 
 +Prebuilt CN0414 Hex File 
 +  * [[https://github.com/analogdevicesinc/EVAL-ADICUP3029/releases/download/Latest/ADuCM3029_demo_cn0414.hex| AduCM3029_demo_cn0414.Hex]] 
 +Complete CN0414 Source Files 
 +  * [[https://github.com/analogdevicesinc/EVAL-ADICUP3029/tree/master/projects/ADuCM3029_demo_cn0414| AduCM3029_demo_cn0414 Source Code]]
    
 </WRAP> </WRAP>
- 
- 
 ===== How to use the Tools ===== ===== How to use the Tools =====
  
resources/eval/user-guides/eval-adicup3029/reference_designs/demo_cn0414.1542373710.txt.gz · Last modified: 16 Nov 2018 14:08 by Andrei Drimbarean

Page Tools