Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
resources:eval:user-guides:eval-adicup3029:reference_designs:demo_adt7420 [19 Jul 2017 22:17] – launch directions Brandon Busheyresources:eval:user-guides:eval-adicup3029:reference_designs:demo_adt7420 [14 Mar 2021 06:04] (current) – [Obtaining the Source Code] adding in .Hex files Zuedmar Arceo
Line 6: Line 6:
 ===== General Description/Overview ===== ===== General Description/Overview =====
  
-The **ADICUP3029_ADT7420** project uses [[http://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-ADT7420-PMDZ.html/ | EVAL-ADT7420-PMDZ]] PMOD which is a 16-bit ambient temperature sensor. It requires no calibration.+The **ADICUP3029_ADT7420** project uses [[adi>en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-ADT7420-PMDZ.html/ | EVAL-ADT7420-PMDZ]] PMOD which is a 16-bit ambient temperature sensor. It requires no calibration. 
 + 
 +===== Demo Video ===== 
 + 
 +{{analogTV>5554821977001}}
  
 ===== Demo Requirements  ===== ===== Demo Requirements  =====
Line 116: Line 120:
 \\ \\
  
-===== Obtaining the Source Code =====+===== Obtaining the Software =====
  
-We recommend not opening the project directly, but rather use CrossCore Embedded Studio (CCES) example browse to open the project. Below screen shot shows how to open project from CCES Example browser.+There are two basic ways to program the ADICUP3029 with the software for the ADT7420. 
 +  - Dragging and Dropping the .Hex to the Daplink drive 
 +  - Building, Compiling, and Debugging using CCES 
 + 
 +Using the drag and drop method, the software is going to be a version that Analog Devices creates for testing and evaluation purposes.  This is the EASIEST way to get started with the reference design. 
 + 
 +Importing the project into CrossCore is going to allow you to change parameters and customize the software to fit your needs, but will be a bit more advanced and will require you to download the CrossCore toolchain. Below screen shot shows how to open project from CCES Example browser.
  
  
Line 124: Line 134:
  
  
-The source code and include files of the **ADICUP3029_ADT7420** demo can be found here:+The software for the **ADuCM3029_demo_adt7420** demo can be found here:
  
 <WRAP round 80% download> <WRAP round 80% download>
-[[https://github.com/analogdevicesinc/sensor-sw-pack/tree/master/Boards/EVAL-ADICUP3029/Examples/temp/adt7420/noos| ADT7420 + ADICUP3029 Source Code]]+Prebuilt ADT7420 Hex File 
 +  * [[https://github.com/analogdevicesinc/EVAL-ADICUP3029/releases/download/Latest/ADuCM3029_demo_adt7420.hex| AduCM3029_demo_adt7420.Hex]] 
 +Complete ADT7420 Source Files 
 +  * [[https://github.com/analogdevicesinc/EVAL-ADICUP3029/tree/master/projects/ADuCM3029_demo_adt7420| AduCM3029_demo_adt7420 Source Code]] 
 </WRAP> </WRAP>
  
Line 157: Line 171:
 \\ \\
 \\ \\
 +====== More Information ======
 +
 +{{page>resources:eval:user-guides:eval-adicup3029:reference_designs:ble_packet}}
  
 // End of Document // // End of Document //
  
  
resources/eval/user-guides/eval-adicup3029/reference_designs/demo_adt7420.1500495467.txt.gz · Last modified: 19 Jul 2017 22:17 by Brandon Bushey

Page Tools