This version is outdated by a newer approved version.
This version (17 Sep 2018 07:35) was approved by Gowtham shanmugaraj.
This version (17 Sep 2018 07:35) was approved by Gowtham shanmugaraj.This is an old revision of the document!
Using Keil IDE with EV-COG-AD3029WZ
There are no seperate toolchain,On-Board Peripheral Drivers & Software for EV-COG-AD3029WZ, the toolchain,On-Board Peripheral Drivers & Software for EV-COG-AD3029LZ works with EV-COG-AD3029WZ.The user needs to change only the pin muxing based on the application.For help regarding pinmapping refer to the Hardware Details section.
This will be a paragraph talk about why you might want to use Keil with the EV-COG-AD3029LZ.
How to use EV-COG-AD3029WZ with Keil
In order to use EV-COG-AD3029WZ board with Keil, you will need to replicate the following steps.
- Install mBed windows serial driver from
- Open any example-workspace and project from the ADuCM3029 BSP(board support package). I used the SysTick example in the below images
- In the Keil toolbar select Project → Options → Debug, and select the “CMSIS DAP” option
- Under the CMSIS DAP Settings, select the SW option
- Push Crtl+F5 or in the Keil toolbar select Debug → Start/Stop Debug Session
- That’s it – You are ready to go.
End of Document
resources/eval/user-guides/ev-cog-ad3029wz/tools/other_ide.1537162542.txt.gz · Last modified: 17 Sep 2018 07:35 by Gowtham shanmugaraj